Apogee
Apogee X-VID-SYC-GEN Video Expansion Card for Big Ben and other Apogee products for sale online.
Apogee X-VID-SYC-GEN Video Expansion Card for Big Ben
The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal will be re-clocked and regenerated, maintaining the same field and colorburst phase information, but stripped of its line information and replaced by video-black. In slave mode the board will auto-detect the incoming video-standard and configure itself accordingly. The video input is of very high tolerance and will even lock to unstable sources like VCR's.The Apogee X-VID-SYC-GEN Video Expansion Board has three modes of operation. •Master mode: The user selects the video format on the frontpanel of the Big Ben. The Big Ben will slave to the generated video signal •Attended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben will slave to the incoming video signal •Unattended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben is not clocking to the Video board and therefore both will function independentlyIMPORTANT NOTE for OS X Leopard compatibility To ensure your Apogee product works well with Mac OS X Leopard v10.5, it is critical that you follow the instructions provided at the Apogee website address below.If you have an existing Apogee software CD or a previously downloaded installer, please do not use it with Leopard. Only use the software and driver versions provided at the link below that are specifically indicated as "Compatible with Leopard."http://www.apogeedigital.com/leopard/If you have any questions, please call Apogee support at 310-584-9394....details
Apogee AD-16X 16 Channel A/D Converter ¹
The AD-16X analog to digital converter applies an advanced conversion system, taking the legendary quality of Apogee a huge step forward. Features such as a redesigned power supply, standard 192kHz sampling rates, the C777 clocking technology found in Big Ben, and optional Pro Tools HD and FireWire expansion cards, make the AD-16X and DA-16X (sold separately), the most powerful and flexible conversion combination ever. Not only does the X-Series hardware offer unequaled groundbreaking technology but it also makes superior ADA conversion available at a fraction of the cost associated with previous, premium Apogee gear. And now it's approved for use with Pro Tools HD 8 hardware and software running on MAC OS X 10.5.5 or Windows XP SP 2.Advanced High-Definition Conversion The most critical component in the digital recording environment is proper, high-quality conversion, and since the dawn of digital recording, the most desired converters have been made by Apogee. With up to 192k standard sample rates, the rackmountable AD-16X combines Apogee's legendary conversion quality with the very latest in high-definition digital to provide unrivaled flexibility and quality.Redesigned Power Supply Enabling optimum conversion requires a state of the art power supply. The fully redesigned power system of the AD-16X converter incorporates a specially designed Synchronous Switching power supply that works in conjunction with Apogee's very stable low jitter clock and filtering technology to provide superior heat and noise performance and an improved transient response over our previous linear power supply. This creates a power system that delivers total efficiency and provides an ideal environment for premium conversion.Redesigned Analog Section Incorporated in the Apogee AD-16X are the very latest developments in Apogee's groundbreaking analog circuit design. Through sophisticated implementation and optimal configuration, the selection of premium, contemporary opamps allows the X-Series to deliver conversion performance never before heard, while maintaining the signature Apogee sound: Clear, transparent, focused and punchy.C777 Clocking used by Big Ben The AD-16X converter use Apogee's C777 clocking technology. Famous for keeping Big Ben on time, the C777 utilizes an entirely digital process that Apogee has developed with the most advanced Direct Digital Synthesis (DDS) technology and DSP-based digital filtering. With a stable, crystal based digital PLL handling the clocking, AD-16X is able to intelligently manipulate incoming signals and adapt to them accordingly. The result? The most aggressive jitter reduction ever and an astonishing and noticeable difference in sound quality.Connect Directly to Pro Tools HD or any FireWire Enabled Computer Like the Rosetta 800, the AD-16X converter offers an expansion card slot that greatly increases connectivity possibilities. Add an optional X-Series HD card (sold separately) and connect AD-16X directly...details
Apogee SIM PCI-E 32-Channel Expansion Card MAC
The Apogee SIM PCI-E Card offers the connectivity, scalability and performance that makes the Symphony System the most professional native audio solution available for a Mac. The SIM PCI Card connects directly to any Mac that utilizes PCI-E slots. When configured with any combination of Rosetta 800, or X-Series converters and the Symphony X-Series option card, the Symphony system will deliver the highest I/O and lowest latency performance of any native hardware solution available for the Mac....details
Apogee X-FireWire
The Apogee X FireWire is an expansion card that gives you the power and convenience of a direct FireWire connection in your AD-16X, DA-16X, Rosetta 200 or Rosetta 800. Based on S400 standards the X-FireWire board uses an expansion slot in the ROSETTA 800 to give users of Logic, Nuendo, and other popular software the option of amazing sounding Apogee conversion. With low-latency Core Audio (Mac) and ASIO drivers for leading operating systems, your hardware options for your DAW are greatly expanded. The three ports on the Apogee X-FireWire Card allow you to daisy-chain additional devices to create an entire system. By extending the bus, the X-FireWire card allows for daisy-chaining of multiple Apogee systems or compatible peripherals, and permits the use of multiple FireWire devices by computers with only one port. The expansion board also passes power through the FireWire ports to allow the powering of additional devices. With and X-FireWire card installed in an AD-16X, DA-16X, Rosetta 200 or Rosetta 800 you have the power of a professional FireWire connection to your favorite DAW: Logic 7, Nuendo, Cubase, Cakewalk, Live or virtually any native audio production software. FireMix is a mixer application that allows control and creation of customizable sub-mixes for low latency performance in the native environment. FireMix features accurate input and output metering, 16 bit fader control, and eight 48 bit mix busses with enough DSP headroom to insure that there are no compromises to the audio quality. FireMix also has customizable pan control and key modifier user preferences to allow FireMix to operate in the same manner as your favorite audio application. With FireMix, you will get low latency monitoring, have the ability to save and recall all of your mixes, group and ungroup master faders all with little to no impact on your CPU performance....details
Apogee X-HD Expansion Card for Pro Tools HD and AD/DA-16X
The Apogee X-Series-HD PCI expansion card allows for direct connectivity between Pro Tools HD systems and the AD&DA-16X, Rosetta 800 and Rosetta 200. The result is an incredibly powerful combination of Digidesign's industry leading software and a new generation of superior Apogee conversion and clocking hardware that provides a workstation that will excite Apogee and Pro Tools fans alike. With an X-HD card installed, you can connect the AD-16x, DA-16x, Rosetta 800, and Rosetta 200 directly to your Pro Tools core or Accel card with no other hardware required.IMPORTANT NOTE for OS X Leopard compatibility To ensure your Apogee product works well with Mac OS X Leopard v10.5, it is critical that you follow the instructions provided at the Apogee website address below.If you have an existing Apogee software CD or a previously downloaded installer, please do not use it with Leopard. Only use the software and driver versions provided at the link below that are specifically indicated as "Compatible with Leopard."http://www.apogeedigital.com/leopard/If you have any questions, please call Apogee support at 310-584-9394....details
Apogee Symphony 32 Expansion Card for X-Series or Rosetta Converters
The Apogee Symphony 32 Expansion Card offers expanded connectivity, scalability, and performance for your Symphony System. The Symphony 32 card fits into any X-Series or Rosetta Series converter, providing a simple and rock-solid connection to the card while leaving other digital I/Os available. Choose any combination of X-Series or Rosetta Series converters to build the heart of your system, add more Symphony 32 cards, and connect directly to Symphony and your Mac Pro or G5 Apple Desktop Computer.IMPORTANT NOTE for OS X Leopard compatibility To ensure your Apogee product works well with Mac OS X Leopard v10.5, it is critical that you follow the instructions provided at the Apogee website address below.If you have an existing Apogee software CD or a previously downloaded installer, please do not use it with Leopard. Only use the software and driver versions provided at the link below that are specifically indicated as "Compatible with Leopard."http://www.apogeedigital.com/leopard/If you have any questions, please call Apogee support at 310-584-9394.NOTE: Update On Feb, 27, 2009, Apogee announced a release of a new Symphony 32 update, it includes the following new features: •SBus - Now you can connect one Symphony 32 card to the second port of a Symphony 64 card. •Euphonix EuCon support - Now you can control the Maestro mixer from EuCon-compatible control surfaces. •Symphony Source allows you to enable and disable PCI cards from the Maestro Control window (or the OS X utility Audio MIDI Setup) without the need to remove them from your Mac.It is recommended that all Symphony users update their systems. To do so, go to the apogee website and look under the "Support" tab....details
Apogee Ensemble FireWire Digital Interface MAC
The Ensemble Multichannel Audio Interface from Apogee delivers high performance converters, pristine preamps, and tight integration with Core Audio. You can use the Ensemble easily with Logic, MOTU Digital Performer, Steinberg Cubase, Bias Peak, Propellerhead Reason, Ableton Live, or any professional Macintosh recording application that supports Core Audio to make flawless recordings. The Ensemble is the first professional audio interface that is all digitally controlled and designed specifically for Apple computers and Logic.The Ensemble features 36 simultaneously available audio channels with 8 channels of Apogee's legendary A/D/A conversion and 4 transparent, digitally controlled 75dB mic preamps. It also has 8 channels of ADAT I/O, 2 channels of S/PDIF coax and optical I/O, and FireWire connectivity to and from the computer. When you get an Ensemble, you also get premium Apogee technologies such as Soft Limit, UV22HR, and Intelliclock. Soft Limit ensures your signal gets the maximum digital input level without overs, UV22HR gives you a superior dither from 24-bit resolution down to 16-bit, and Intelliclock is an advanced, dual-stage clocking tool. These technologies—combined with converters that set the standard for the audio industry—make Ensemble an ideal choice for professionals seeking a high-definition, integrated solution that's easy to use.Apogee Ensemble is the first and only multichannel audio interface that is fully integrated into Logic Pro. With Ensemble, everything from mic pre and output gain to sample and bit rate selection are controllable from within the Apogee Control Panel in Logic.IMPORTANT NOTE for OS X Leopard compatibility To ensure your Apogee product works well with Mac OS X Leopard v10.5, it is critical that you follow the instructions provided at the Apogee website address below.If you have an existing Apogee software CD or a previously downloaded installer, please do not use it with Leopard. Only use the software and driver versions provided at the link below that are specifically indicated as "Compatible with Leopard."http://www.apogeedigital.com/leopard/If you have any questions, please call Apogee support at 310-584-9394....details
Apogee Duet Firewire Interface
The Duet is a 2-channel FireWire audio interface that features the amazing sound quality that made Apogee Electronics famous. With control functions built directly into Apple's Logic Pro, Soundtrack Pro and GarageBand software, Duet empowers you to create professional recordings effortlessly on your Mac.With Duet, you can plug in guitars, keyboards, and microphones to record your music, or simply experience how much better your favorite tracks in iTunes sound. Duet is compact and powered by FireWire, so you can pack up your studio and go anywhere your music takes you.Its dual, 1/4" high impedance inputs allow you to combine and record your two favorite instruments, whether it be two guitars, one bass, one guitar, etc., simultaneously using your favorite Core Audio-compatible application. You can also capture vocals with two microphone inputs that have phantom power and 75dB of gain. Whether you're noodling out new ideas, completing a personal tune, documenting a podcast, or recording a live performance, your new little buddy can handle it. The flexible breakout cables come with icons to make it easy to know what goes where, keeping everything in order, out of the way, and properly connected for maximum input and output, with minimal mess. Duet's bus-powered FireWire interface frees you from the traditional four-wall studio setting. So grab your laptop, find a spot where inspiration takes you, whether it's in the solace of a park or in the echoey confines of a subway tunnel, turn it on, and start doing your thing.If you don't have Logic Pro, Soundtrack Pro, Garageband, don't panic. Apogee's includes it's own Maestro software, so you'll still be able to work with any Core Audio-compatible application. Maestro allows you to turn the Duet's multifunction control knob into a one-click manager. Maestro will help you manage all of Duet's capabilities and settings, including I/O level, source selection, muting, mic/instrument gain mode, assign MIDI function controls to the controller knob, assign meter display, and more. Speaking of meter display, Duet comes with LED I/O meters to help you monitor your levels for maximum effectiveness. Duet is not only great for it's input and interface functions, but it delivers amazing sound quality as well. Whether you're listening to your iTunes collection or latest composition through powered speakers connected to the 1/4" outputs or via the headphone jack, you'll not be disappointed by the crystal clear, playback performance....details
Apogee BIG BEN 192k Master Digital Clock
Apogee's Big Ben 192k Master Digital Clock brings amazing clarity and quality to audio production while providing flexibility and features like no other studio clock before.A Cure for the Jitters — Apogee's "C777" Clock At the heart of any word clock regeneration is a phase lock loop (PLL). The PLL is a combination of analog and digital elements without the ability to dynamically adapt to the nature of the external clocks. In other words, the better the clock performance, the less flexibility it has. And conversely, the more flexibility there is in a PLL, the less effective it is at jitter reduction. Apogee's C777 is built to address these inadequacies. The C777 utilizes an entirely digital process that Apogee has developed using the most advanced Direct Digital Synthesis (DDS) technology available along with DSP based digital filtering. The result is the most aggressive jitter reduction ever. With the flexibility and stability provided the C777, the Big Ben studio clock is able to re-clock devices with excessive jitter and function as if it were the master clock. The ultimate in flexibility combined with unprecedented levels of performance make the C777 unequaled in the world of clocking.Added Flexibility with Format Conversion Not that you would expect it from a master clock, Big Ben gives you the option of real-time format conversion. Use BIG BEN's intuitive digital display to go from S/PDIF to AES, AES to ADAT, ADAT to S/PDIF, etc. X-Video Expansion Card for Video-Sync Generation The multi-standard X-Video card will allow Big Ben to function as a master video sync generator, outputting a composite video black-burst (including color burst for PAL and NTSC color). When functioning as a master video sync generator Big Ben can perform as a clock slave to the video-board and generate digital audio clocks based on the video standard selected. Alternatively, the X-Video card can function as a Slave video sync generator. In this mode the output video will be a regeneration of the input video. The X-Video card will maintain the color-phase and field information through "Genlocking", while simultaneously stripping the original signal from its pixel information. "Adaptive Loop Filtering" (ALF) ALF maximizes Big Ben's clocking ability with an intelligent low pass filter. Because the C777 has made all incoming signals into data (1's and 0's) the Big Ben studio clock is able to dynamically compensate for excessive jitter and even improve already acceptable clock signals to levels unattainable until now. No matter what your input looks like, ALF can adapt and overcome all obstacles to create a stable, reliable, low jitter clock source."SureLock"... Your Drop out Defense So, Big Ben is masterfully handling external clock signals and all of their anomalies and you've got your jitters under control. What if Big Ben encounters the ultimate disturbance in clocking, a dropped signa...details
Apogee FireWire Option Card for Mini-DAC D/A Converter
Apogee's FireWire Option Card for the Mini-DAC D/A converter allows you to connect your Mini-DAC to your DAW at sampling rates up to 192kHz. With this new capability, you'll get more out of your Mini-DAC, making it an even more high-performance, portable recording solution, whether at home, at the studio, or on the road. The FireWire Option card provides 2 channels of 24-bit 192kHz D/A conversion, a high-current headphone output, and includes AES, optical & S/PDIF coax inputs. The FireWire card also gives you an analog Output level control for direct connection of powered monitors....details
Apogee Symphony Mobile
Rock solid or record softly with Apogee's Symphony Mobile—it gives you the quality of performance you desire and expect from a desktop traditional workstation. The Symphony Mobile delivers up to 32 channels of 24-bit/192kHz digital I/O with as little as 1.6 milliseconds of latency from analog source to analog source. It's compatible with any CoreAudio software application using VBus for proper routing, and comes with Apogee's Maestro software for even more control and routing. So when you're ready to convert ideas into more concrete sounds, insert the Symphony Mobile ExpressCard interface into your MacBook Pro, connect the PCI-32 cable into either Apogee's X-series or Rosetta Series converters and you're ready to do your thing.NOTE: IMPORTANT NEW MACBOOK PRO COMPATIBILITYIn order to be compatible with Apple's new 15" and 17" MacBook Pros, the Symphony Mobile card requires a firmware update. If you do not perform this upgrade and try to boot with the Symphony Mobile card installed, the Mac will not boot properly. Simply remove the Symphony Mobile card and restart your computer. If your MacBook Pro is already booted and you insert the Symphony Mobile card, your Mac will become unresponsive. Again, just remove the Symphony Mobile card and restart.This firmware upgrade must be performed using a previous generation MacBook Pro. If you do not have access to a MacBook Pro released prior to October 14, 2008, then the update can be performed by Apogee....details
Apogee ROSETTA-200 2 Channel AD / DA Converter 24bit / 192khz
The Rosetta 200 converter, Apogee's successor to the PSX-100 and Rosetta AD namesake, delivers the quality of the popular Rosetta 800 in a 2-channel AD/DA solution. Like the Rosetta 800, the 200 features premium Apogee A/D and D/A conversion, 192k sampling rates (standard), optional Pro Tools HD, Mix and FireWire expansion cards and core Apogee technologies such as UV22HR and SoftLimit. And while the Rosetta 200 shares much of its feature set with its cousin, it throws in some irresistible extras such as the CODA Audio Finishing Module, full channel metering, and MIDI and S/PDIF input and output. Flexibility and features galore make the Rosetta 200 an outstanding option for professional and project studios, mastering engineers, and audio archivists. And now it's approved for use with Pro Tools HD 8 hardware and software running on Mac OS X 10.5.5 or Windows XP SP 2.Legendary Apogee Conversion in High-Definition The most crucial component in the digital recording environment is high-quality A/D conversion and the most trusted and desirable converters are made by Apogee. With up to 192k sample rates, the Rosetta 200 Converter combines Apogee's legendary conversion quality with flexibility that complements any digital audio workstation.The CODA: Audio Finishing Module, including the Aptomizer, Sample Rate Conversion (SRC), and UV22HR As higher definition audio becomes ever-present in the recording process and music continues to be delivered as a product at 44.1kHz/16-bit you need tools to minimize the loss of detail and quality that can be inherent in the course of music production.To meet these challenges Apogee has developed CODA. Unique to the Rosetta 200, CODA offers a trio of tools that will preserve the integrity of hi-def recordings with a minimal loss of quality. Heading up the CODA threesome is Apogee's "Aptomizer." With the Apotimizer you can maximize levels with out increasing noise and distortion. Great for recording, and mastering, the Apotimizer's "Learn" mode allows the Rosetta 200 to automatically determine the optimum level, and use it consistently to normalize incoming audio. Another aspect of CODA is premium sample rate conversion (SRC). In the past, Apogee hardware has not offered sample rate conversion because the results were disappointing but recent advances have made SRC a viable option and now a vital part of CODA. With Apogee's implementation of sample rate conversion you can up or down sample without noticeably affecting the quality of your audio. Apogee's "UV22HR" dithering technology completes the CODA triangle by offering powerful reduction of high-resolution digital audio to 16 bits for the Internet and CD mastering. It is estimated that UV22HR is used on 8 out of 10 commercially released CDs in the U.S. The Rosetta 200 with CODA on board provides an end-to-end solution for capturing and optimizing high definition digital. Connect directly to Pro Tools HD and Mi...details
Apogee DA-16X 16 Channel D/A Converter ¹
The Apogee DA-16X digital to analog converter applies an advanced conversion system, taking the legendary quality of Apogee a huge step forward. Features such as a redesigned power supply, standard 192kHz sampling rates, the C777 clocking technology found in Big Ben, and optional Pro Tools HD and FireWire expansion cards, make the DA-16X the most powerful and flexible conversion combination ever. Not only does the X-Series hardware offer unequaled, groundbreaking technology but it also makes the audio converter available at a fraction of the cost associated with previous, premium Apogee gear. And now it's approved for use with Pro Tools HD 8 hardware and software running on MAC OS X 10.5.5 or Windows XP SP 2.Advanced High-Definition Conversion The most critical component in the digital recording environment is proper, high-quality conversion and since the dawn of digital recording the most desired converters have been made by Apogee. With up to 192k standard sample rates, the rackmountable DA-16X converter combines Apogee's legendary conversion quality with the very latest in high-definition digital to provide unrivaled flexibility and quality.Redesigned Power Supply Enabling optimum conversion requires a state of the art power supply. The fully redesigned power system of the Apogee DA-16X incorporates a specially designed Synchronous Switching power supply that works in conjunction with Apogee's very stable low jitter clock and filtering technology to provide superior heat and noise performance and an improved transient response over our previous linear power supply. This creates a power system that delivers total efficiency and provides an ideal environment for premium conversion.Redesigned Analog Section Incorporated in the DA-16X converter are the very latest developments in Apogee's groundbreaking analog circuit design. Through sophisticated implementation and optimal configuration, the selection of premium, contemporary opamps allows the X-Series to deliver conversion performance never before heard, while maintaining the signature Apogee sound: Clear, transparent, focused and punchy.C777 Clocking used by Big Ben The DA 16-X uses Apogee's C777 clocking technology. Famous for keeping Big Ben on time, the C777 utilizes an entirely digital process that Apogee has developed with the most advanced Direct Digital Synthesis (DDS) technology and DSP-based digital filtering. With a stable, crystal based digital PLL handling the clocking, DA-16X are able to intelligently manipulate incoming signals and adapt to them accordingly. The result? The most aggressive jitter reduction ever and an astonishing and noticeable difference in sound quality.Connect Directly to Pro Tools HD or any FireWire Enabled Computer Like the Apogee Rosetta 800, the DA-16X offer an expansion card slot that greatly increases connectivity possibilities. Add an optional X-Series HD card (sold separately) and connect DA-16X directly to your computer via your HD...details
Apogee Digital Interconnects 110 Ohm Digital Cable AES-8 Digital
A number of specialized breakout and interface cables are available from Apogee. These are typically designed for Apogee converter products in which multiway connectors are used to get a large number of inputs or outputs into a single connector. At the other end of the cable, usually 1m (3.28') in length, will be standard connectors, such as XLRs.AES-16-DIGI-IFC: For use with: Connecting the AD-16 and the DA-16 to the Digidesign 192 Digital Format: AES/EBU In/Out A 16-channel AES digital Input/Output cable for Digi HD Systems. The AES-16-DIGI-IFC is needed to connect Apogee's AD-16 and DA-16 to the Digidesign 192 Digital. The AES-16-DIGI-IFC is a special cable designed specifically for this purpose. Each connector is labeled to indicate the unit to which it should be connected. There are a total of four DB-25 connectors on this cable. One goes to the AD-16 AES output, one goes to the DA-16 AES input, and two connectors are for the 192 Digital. You will need two the digital option cards for the DA-16 to use 16 channels of AES.AES-8-DIGI-IFC: For use with: Rosetta 800 Format: AES In/Out, Yamaha Pin Out DB 25 Male To 4-XLRM/4XLRF An 8-channel AES digital Input/Output Cable for Digi HD Systems. Eight channel AES3 input/output connection with 4 Neutrik XLR male and 4 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 8 channels of AES input and output as per the AES standard. Provides 4 AES/EBU XLR inputs and 4 AES/EBU XLR outputs to a DB-25 multipin connector for Rosetta 800 and any other device that supports the Yamaha 8 channel digital In/Out wiring format.AES8-IFC: For use with: Rosetta 800 Format: AES/EBU In/Out Eight channels of AES/EBU input/output connection with 4 Neutrik XLR male and 4 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 8 channels of AES input and output as per the AES standard. Thumbscrews are 2.6mm. Provides 4 AES/EBU XLR inputs and 4 AES/EBU XLR outputs to a DB-25 multipin connector for the Rosetta 800 and any other device that supports the Yamaha 8 channel digital In/Out wiring format.AD16-AES-IFC: For use with: AD-16X Format: AES/EBU In/Out Sixteen channel AES/EBU output connection with 8 Neutrik XLR male connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES output as per the AES standard. Thumbscrews are 2.6mm. Provides 8 AES/EBU XLR outputs to a DB-25 multipin connector for the AD-16X. Provides 16 channels of AES/EBU output.DA16-AES-IFC: For use with: DA-16X Format: AES/EBU In/Out Sixteen channel AES/EBU input connection with 8 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES input as per the AES standard. Thumbscrews are 2.6mm. Provides 8 AES/...details
Apogee Digital Interconnects 110 Ohm Digital Cable AES-16
A number of specialized breakout and interface cables are available from Apogee. These are typically designed for Apogee converter products in which multiway connectors are used to get a large number of inputs or outputs into a single connector. At the other end of the cable, usually 1m (3.28') in length, will be standard connectors, such as XLRs.AES-16-DIGI-IFC: For use with: Connecting the AD-16 and the DA-16 to the Digidesign 192 Digital Format: AES/EBU In/Out A 16-channel AES digital Input/Output cable for Digi HD Systems. The AES-16-DIGI-IFC is needed to connect Apogee's AD-16 and DA-16 to the Digidesign 192 Digital. The AES-16-DIGI-IFC is a special cable designed specifically for this purpose. Each connector is labeled to indicate the unit to which it should be connected. There are a total of four DB-25 connectors on this cable. One goes to the AD-16 AES output, one goes to the DA-16 AES input, and two connectors are for the 192 Digital. You will need two the digital option cards for the DA-16 to use 16 channels of AES.AES-8-DIGI-IFC: For use with: Rosetta 800 Format: AES In/Out, Yamaha Pin Out DB 25 Male To 4-XLRM/4XLRF An 8-channel AES digital Input/Output Cable for Digi HD Systems. Eight channel AES3 input/output connection with 4 Neutrik XLR male and 4 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 8 channels of AES input and output as per the AES standard. Provides 4 AES/EBU XLR inputs and 4 AES/EBU XLR outputs to a DB-25 multipin connector for Rosetta 800 and any other device that supports the Yamaha 8 channel digital In/Out wiring format.AES8-IFC: For use with: Rosetta 800 Format: AES/EBU In/Out Eight channels of AES/EBU input/output connection with 4 Neutrik XLR male and 4 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 8 channels of AES input and output as per the AES standard. Thumbscrews are 2.6mm. Provides 4 AES/EBU XLR inputs and 4 AES/EBU XLR outputs to a DB-25 multipin connector for the Rosetta 800 and any other device that supports the Yamaha 8 channel digital In/Out wiring format.AD16-AES-IFC: For use with: AD-16X Format: AES/EBU In/Out Sixteen channel AES/EBU output connection with 8 Neutrik XLR male connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES output as per the AES standard. Thumbscrews are 2.6mm. Provides 8 AES/EBU XLR outputs to a DB-25 multipin connector for the AD-16X. Provides 16 channels of AES/EBU output.DA16-AES-IFC: For use with: DA-16X Format: AES/EBU In/Out Sixteen channel AES/EBU input connection with 8 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES input as per the AES standard. Thumbscrews are 2.6mm. Provides 8 AES/...details
Apogee Digital Interconnects 110 Ohm Digital Cable AES-8
A number of specialized breakout and interface cables are available from Apogee. These are typically designed for Apogee converter products in which multiway connectors are used to get a large number of inputs or outputs into a single connector. At the other end of the cable, usually 1m (3.28') in length, will be standard connectors, such as XLRs.AES-16-DIGI-IFC: For use with: Connecting the AD-16 and the DA-16 to the Digidesign 192 Digital Format: AES/EBU In/Out A 16-channel AES digital Input/Output cable for Digi HD Systems. The AES-16-DIGI-IFC is needed to connect Apogee's AD-16 and DA-16 to the Digidesign 192 Digital. The AES-16-DIGI-IFC is a special cable designed specifically for this purpose. Each connector is labeled to indicate the unit to which it should be connected. There are a total of four DB-25 connectors on this cable. One goes to the AD-16 AES output, one goes to the DA-16 AES input, and two connectors are for the 192 Digital. You will need two the digital option cards for the DA-16 to use 16 channels of AES.AES-8-DIGI-IFC: For use with: Rosetta 800 Format: AES In/Out, Yamaha Pin Out DB 25 Male To 4-XLRM/4XLRF An 8-channel AES digital Input/Output Cable for Digi HD Systems. Eight channel AES3 input/output connection with 4 Neutrik XLR male and 4 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 8 channels of AES input and output as per the AES standard. Provides 4 AES/EBU XLR inputs and 4 AES/EBU XLR outputs to a DB-25 multipin connector for Rosetta 800 and any other device that supports the Yamaha 8 channel digital In/Out wiring format.AES8-IFC: For use with: Rosetta 800 Format: AES/EBU In/Out Eight channels of AES/EBU input/output connection with 4 Neutrik XLR male and 4 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 8 channels of AES input and output as per the AES standard. Thumbscrews are 2.6mm. Provides 4 AES/EBU XLR inputs and 4 AES/EBU XLR outputs to a DB-25 multipin connector for the Rosetta 800 and any other device that supports the Yamaha 8 channel digital In/Out wiring format.AD16-AES-IFC: For use with: AD-16X Format: AES/EBU In/Out Sixteen channel AES/EBU output connection with 8 Neutrik XLR male connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES output as per the AES standard. Thumbscrews are 2.6mm. Provides 8 AES/EBU XLR outputs to a DB-25 multipin connector for the AD-16X. Provides 16 channels of AES/EBU output.DA16-AES-IFC: For use with: DA-16X Format: AES/EBU In/Out Sixteen channel AES/EBU input connection with 8 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES input as per the AES standard. Thumbscrews are 2.6mm. Provides 8 AES/...details
Apogee Digital Interconnects 110 Ohm Digital Cable AD-16 AES
A number of specialized breakout and interface cables are available from Apogee. These are typically designed for Apogee converter products in which multiway connectors are used to get a large number of inputs or outputs into a single connector. At the other end of the cable, usually 1m (3.28') in length, will be standard connectors, such as XLRs.AES-16-DIGI-IFC: For use with: Connecting the AD-16 and the DA-16 to the Digidesign 192 Digital Format: AES/EBU In/Out A 16-channel AES digital Input/Output cable for Digi HD Systems. The AES-16-DIGI-IFC is needed to connect Apogee's AD-16 and DA-16 to the Digidesign 192 Digital. The AES-16-DIGI-IFC is a special cable designed specifically for this purpose. Each connector is labeled to indicate the unit to which it should be connected. There are a total of four DB-25 connectors on this cable. One goes to the AD-16 AES output, one goes to the DA-16 AES input, and two connectors are for the 192 Digital. You will need two the digital option cards for the DA-16 to use 16 channels of AES.AES-8-DIGI-IFC: For use with: Rosetta 800 Format: AES In/Out, Yamaha Pin Out DB 25 Male To 4-XLRM/4XLRF An 8-channel AES digital Input/Output Cable for Digi HD Systems. Eight channel AES3 input/output connection with 4 Neutrik XLR male and 4 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 8 channels of AES input and output as per the AES standard. Provides 4 AES/EBU XLR inputs and 4 AES/EBU XLR outputs to a DB-25 multipin connector for Rosetta 800 and any other device that supports the Yamaha 8 channel digital In/Out wiring format.AES8-IFC: For use with: Rosetta 800 Format: AES/EBU In/Out Eight channels of AES/EBU input/output connection with 4 Neutrik XLR male and 4 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 8 channels of AES input and output as per the AES standard. Thumbscrews are 2.6mm. Provides 4 AES/EBU XLR inputs and 4 AES/EBU XLR outputs to a DB-25 multipin connector for the Rosetta 800 and any other device that supports the Yamaha 8 channel digital In/Out wiring format.AD16-AES-IFC: For use with: AD-16X Format: AES/EBU In/Out Sixteen channel AES/EBU output connection with 8 Neutrik XLR male connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES output as per the AES standard. Thumbscrews are 2.6mm. Provides 8 AES/EBU XLR outputs to a DB-25 multipin connector for the AD-16X. Provides 16 channels of AES/EBU output.DA16-AES-IFC: For use with: DA-16X Format: AES/EBU In/Out Sixteen channel AES/EBU input connection with 8 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES input as per the AES standard. Thumbscrews are 2.6mm. Provides 8 AES/...details
Apogee Digital Interconnects 110 Ohm Digital Cable DA-16 AES
A number of specialized breakout and interface cables are available from Apogee. These are typically designed for Apogee converter products in which multiway connectors are used to get a large number of inputs or outputs into a single connector. At the other end of the cable, usually 1m (3.28') in length, will be standard connectors, such as XLRs.AES-16-DIGI-IFC: For use with: Connecting the AD-16 and the DA-16 to the Digidesign 192 Digital Format: AES/EBU In/Out A 16-channel AES digital Input/Output cable for Digi HD Systems. The AES-16-DIGI-IFC is needed to connect Apogee's AD-16 and DA-16 to the Digidesign 192 Digital. The AES-16-DIGI-IFC is a special cable designed specifically for this purpose. Each connector is labeled to indicate the unit to which it should be connected. There are a total of four DB-25 connectors on this cable. One goes to the AD-16 AES output, one goes to the DA-16 AES input, and two connectors are for the 192 Digital. You will need two the digital option cards for the DA-16 to use 16 channels of AES.AES-8-DIGI-IFC: For use with: Rosetta 800 Format: AES In/Out, Yamaha Pin Out DB 25 Male To 4-XLRM/4XLRF An 8-channel AES digital Input/Output Cable for Digi HD Systems. Eight channel AES3 input/output connection with 4 Neutrik XLR male and 4 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 8 channels of AES input and output as per the AES standard. Provides 4 AES/EBU XLR inputs and 4 AES/EBU XLR outputs to a DB-25 multipin connector for Rosetta 800 and any other device that supports the Yamaha 8 channel digital In/Out wiring format.AES8-IFC: For use with: Rosetta 800 Format: AES/EBU In/Out Eight channels of AES/EBU input/output connection with 4 Neutrik XLR male and 4 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 8 channels of AES input and output as per the AES standard. Thumbscrews are 2.6mm. Provides 4 AES/EBU XLR inputs and 4 AES/EBU XLR outputs to a DB-25 multipin connector for the Rosetta 800 and any other device that supports the Yamaha 8 channel digital In/Out wiring format.AD16-AES-IFC: For use with: AD-16X Format: AES/EBU In/Out Sixteen channel AES/EBU output connection with 8 Neutrik XLR male connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES output as per the AES standard. Thumbscrews are 2.6mm. Provides 8 AES/EBU XLR outputs to a DB-25 multipin connector for the AD-16X. Provides 16 channels of AES/EBU output.DA16-AES-IFC: For use with: DA-16X Format: AES/EBU In/Out Sixteen channel AES/EBU input connection with 8 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES input as per the AES standard. Thumbscrews are 2.6mm. Provides 8 AES/...details
Apogee PC32-IFC - Symphony PCI Digital Interconnect Cable 10 Meter
This interconnect cable can be used to connect Apogee's Symphony PCI Card to Apogee's X-HD and X-Symphony expansion cards:Symphony PCI Card(sold separately): Introducing Symphony, a multi-channel PCI Express card designed specifically for use with Apple's Macintosh computers. Apogee's Symphony PCI Express card is a digital computer interface that is based on the PCI-Express architecture for Apple's Macintosh computers. Controlled by Apogee's Maestro software, Symphony features 32 channels of digital I/O on a single PCI-Express card format. With support for sample rates up to 192 kHz, Symphony can be used as a digital router or patch-bay when connected to external converters or other digital outboard equipment. Software drivers for Symphony feature extensive routing capabilities and very low latency performance making very high channel, high quality native recording with Apogee converters a reality. Symphony is the professional audio standard for native workstations. Maestro is an innovative software interface between OS X applications (OS 10.4 and above) and Apogee hardware. Maestro is capable of controlling Apogee hardware I/O connected to the computer via FireWire, Symphony, (Apogee's PCI Express card), or both at the same time. Maestro features, multiple low latency mixers, hardware control panels, an input/output routing matrix that is compatible with Rosetta 800, Rosetta 200, AD-16X and DA-16X and a universal control platform for using Apogee hardware in combination with Ensemble. X-HD Card (sold separately): The X-HD Card connects Apogee converters directly to Pro Tools HD and Accel core cards with no other hardware required. Apogee makes the direct connection to Pro Tools / HD systems a reality. The Apogee X-HD option card allows for direct connectivity between Pro Tools HD systems and Apogee's X-Series or Rosetta Series converters. The result is an incredibly powerful combination of Digidesign's' Pro Tools software and Apogee's superior conversion and clocking hardware. It features a primary HD port for connecting directly to HD Core or Accel cards, an expansion port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200), it's compatible with the latest versions of ProTools, and it may be used along side similar interfaces (such as the Digidesign 96 I/O, 192 I/O, Prism Dream ADA-8).X-Symphony Card (sold separately): X-Symphony Card connects Apogee converters to Apogee's Symphony64. Choose any combination of X-Series or Rosetta Series converters to build the heart of your Symphony System, add X-Symphony Cards, and connect directly to Symphony and your Mac Pro Computer. Features a primary port for connecting directly to Symphony PCI cards, and a thru port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200, up to 64-channels per Symphony Card).Choose your cable length!...details
Apogee Wyde Eye Cable AES/EBU XLR .5 Meter
Use the Apogee Wyde Eye Cable for any digital device connection that supports AES/EBU or any analog device connection using balanced XLR connectors.Analog: Balanced 110 ohm Wyde Eye AD connection for 1 channel of balanced analog audio input. Wyde Eye is designed for digital audio and is excellent for analog signals, which are lower bandwidth, offering very low loss, even with low mic level signals.AES: Dual shielded and balanced 110 Ohm AES/EBU using Apogee's acclaimed Wyde Eye cable for connection of 2 channels of digital In/Out and clock signals.For use with Apogee's: AD-16X, Big Ben, DA-16X, Mini-DAC, Rosetta 200, & Rosetta 800....details
Apogee Wyde Eye Cable AES/EBU XLR 1 Meter
Use the Apogee Wyde Eye Cable for any digital device connection that supports AES/EBU or any analog device connection using balanced XLR connectors.Analog: Balanced 110 ohm Wyde Eye AD connection for 1 channel of balanced analog audio input. Wyde Eye is designed for digital audio and is excellent for analog signals, which are lower bandwidth, offering very low loss, even with low mic level signals.AES: Dual shielded and balanced 110 Ohm AES/EBU using Apogee's acclaimed Wyde Eye cable for connection of 2 channels of digital In/Out and clock signals.For use with Apogee's: AD-16X, Big Ben, DA-16X, Mini-DAC, Rosetta 200, & Rosetta 800....details
Apogee Wyde Eye Cable AES/EBU XLR 2 Meter
Use the Apogee Wyde Eye Cable for any digital device connection that supports AES/EBU or any analog device connection using balanced XLR connectors.Analog: Balanced 110 ohm Wyde Eye AD connection for 1 channel of balanced analog audio input. Wyde Eye is designed for digital audio and is excellent for analog signals, which are lower bandwidth, offering very low loss, even with low mic level signals.AES: Dual shielded and balanced 110 Ohm AES/EBU using Apogee's acclaimed Wyde Eye cable for connection of 2 channels of digital In/Out and clock signals.For use with Apogee's: AD-16X, Big Ben, DA-16X, Mini-DAC, Rosetta 200, & Rosetta 800....details
Apogee Wyde Eye Cable AES/EBU XLR 3 Meter
Use the Apogee Wyde Eye Cable for any digital device connection that supports AES/EBU or any analog device connection using balanced XLR connectors.Analog: Balanced 110 ohm Wyde Eye AD connection for 1 channel of balanced analog audio input. Wyde Eye is designed for digital audio and is excellent for analog signals, which are lower bandwidth, offering very low loss, even with low mic level signals.AES: Dual shielded and balanced 110 Ohm AES/EBU using Apogee's acclaimed Wyde Eye cable for connection of 2 channels of digital In/Out and clock signals.For use with Apogee's: AD-16X, Big Ben, DA-16X, Mini-DAC, Rosetta 200, & Rosetta 800....details
Apogee Wyde Eye Cable AES/EBU XLR 5 Meter
Use the Apogee Wyde Eye Cable for any digital device connection that supports AES/EBU or any analog device connection using balanced XLR connectors.Analog: Balanced 110 ohm Wyde Eye AD connection for 1 channel of balanced analog audio input. Wyde Eye is designed for digital audio and is excellent for analog signals, which are lower bandwidth, offering very low loss, even with low mic level signals.AES: Dual shielded and balanced 110 Ohm AES/EBU using Apogee's acclaimed Wyde Eye cable for connection of 2 channels of digital In/Out and clock signals.For use with Apogee's: AD-16X, Big Ben, DA-16X, Mini-DAC, Rosetta 200, & Rosetta 800....details
Apogee Wyde Eye Cable AES/EBU XLR 10 Meter
Use the Apogee Wyde Eye Cable for any digital device connection that supports AES/EBU or any analog device connection using balanced XLR connectors.Analog: Balanced 110 ohm Wyde Eye AD connection for 1 channel of balanced analog audio input. Wyde Eye is designed for digital audio and is excellent for analog signals, which are lower bandwidth, offering very low loss, even with low mic level signals.AES: Dual shielded and balanced 110 Ohm AES/EBU using Apogee's acclaimed Wyde Eye cable for connection of 2 channels of digital In/Out and clock signals.For use with Apogee's: AD-16X, Big Ben, DA-16X, Mini-DAC, Rosetta 200, & Rosetta 800....details
Apogee Wyde Eye Cable - Word Clock - BNC Coaxial .5 Meter
Use the Apogee Wyde Eye cable for any 75 ohm word clock connection between digital audio devices.Provides 75 Ohm Word Clock input/output connection using Apogee's acclaimed Wyde Eye cable in the BNC-BNC configuration. This audio cable provides the word clock signal to synchronize to and from other units that provide word clock, such as the Apogee Big Ben.For use with Apogee's: AD-16X, Big Ben, DA-16X, Rosetta 200, & Rosetta 800....details
Apogee Wyde Eye Cable - Word Clock - BNC Coaxial 1 Meter
Use the Apogee Wyde Eye cable for any 75 ohm word clock connection between digital audio devices.Provides 75 Ohm Word Clock input/output connection using Apogee's acclaimed Wyde Eye cable in the BNC-BNC configuration. This audio cable provides the word clock signal to synchronize to and from other units that provide word clock, such as the Apogee Big Ben.For use with Apogee's: AD-16X, Big Ben, DA-16X, Rosetta 200, & Rosetta 800....details
Apogee Wyde Eye Cable - Word Clock - BNC Coaxial 2 Meter
Use the Apogee Wyde Eye cable for any 75 ohm word clock connection between digital audio devices.Provides 75 Ohm Word Clock input/output connection using Apogee's acclaimed Wyde Eye cable in the BNC-BNC configuration. This audio cable provides the word clock signal to synchronize to and from other units that provide word clock, such as the Apogee Big Ben.For use with Apogee's: AD-16X, Big Ben, DA-16X, Rosetta 200, & Rosetta 800....details
Apogee Wyde Eye Cable - Word Clock - BNC Coaxial 3 Meter
Use the Apogee Wyde Eye cable for any 75 ohm word clock connection between digital audio devices.Provides 75 Ohm Word Clock input/output connection using Apogee's acclaimed Wyde Eye cable in the BNC-BNC configuration. This audio cable provides the word clock signal to synchronize to and from other units that provide word clock, such as the Apogee Big Ben.For use with Apogee's: AD-16X, Big Ben, DA-16X, Rosetta 200, & Rosetta 800....details
Apogee Wyde Eye Cable - Word Clock - BNC Coaxial 5 Meter
Use the Apogee Wyde Eye cable for any 75 ohm word clock connection between digital audio devices.Provides 75 Ohm Word Clock input/output connection using Apogee's acclaimed Wyde Eye cable in the BNC-BNC configuration. This audio cable provides the word clock signal to synchronize to and from other units that provide word clock, such as the Apogee Big Ben.For use with Apogee's: AD-16X, Big Ben, DA-16X, Rosetta 200, & Rosetta 800....details
Apogee Wyde Eye Cable - S/PDIF - RCA Coaxial .5 Meter
Use the Apogee Wyde Eye cable with Big Ben, Ensemble, Mini-DAC, Rosetta 200 and for other digital device connections that supports S/PDIF, DOLBY AC-3, and DTS on a 75 ohm coaxial connection. It creates a coaxial 75 ohm S/PDIF connection for 2 channels of digital In/Out and clock signals. S/PDIF supports 2 channels of digital audio at sample rates up to 192kHz....details
Apogee Wyde Eye Cable - S/PDIF - RCA Coaxial 1 Meter
Use the Apogee Wyde Eye cable with Big Ben, Ensemble, Mini-DAC, Rosetta 200 and for other digital device connections that supports S/PDIF, DOLBY AC-3, and DTS on a 75 ohm coaxial connection. It creates a coaxial 75 ohm S/PDIF connection for 2 channels of digital In/Out and clock signals. S/PDIF supports 2 channels of digital audio at sample rates up to 192kHz....details
Apogee Wyde Eye Cable - S/PDIF - RCA Coaxial 2 Meter
Use the Apogee Wyde Eye cable with Big Ben, Ensemble, Mini-DAC, Rosetta 200 and for other digital device connections that supports S/PDIF, DOLBY AC-3, and DTS on a 75 ohm coaxial connection. It creates a coaxial 75 ohm S/PDIF connection for 2 channels of digital In/Out and clock signals. S/PDIF supports 2 channels of digital audio at sample rates up to 192kHz....details
Apogee Wyde Eye Cable - S/PDIF - RCA Coaxial 3 Meter
Use the Apogee Wyde Eye cable with Big Ben, Ensemble, Mini-DAC, Rosetta 200 and for other digital device connections that supports S/PDIF, DOLBY AC-3, and DTS on a 75 ohm coaxial connection. It creates a coaxial 75 ohm S/PDIF connection for 2 channels of digital In/Out and clock signals. S/PDIF supports 2 channels of digital audio at sample rates up to 192kHz....details
Apogee Wyde Eye Cable - S/PDIF - RCA Coaxial 5 Meter
Use the Apogee Wyde Eye cable with Big Ben, Ensemble, Mini-DAC, Rosetta 200 and for other digital device connections that supports S/PDIF, DOLBY AC-3, and DTS on a 75 ohm coaxial connection. It creates a coaxial 75 ohm S/PDIF connection for 2 channels of digital In/Out and clock signals. S/PDIF supports 2 channels of digital audio at sample rates up to 192kHz....details
Apogee Wyde Eye Cable - Word Clock - BNC Coaxial 10 Meter
Use the Apogee Wyde Eye cable for any 75 ohm word clock connection between digital audio devices.Provides 75 Ohm Word Clock input/output connection using Apogee's acclaimed Wyde Eye cable in the BNC-BNC configuration. This audio cable provides the word clock signal to synchronize to and from other units that provide word clock, such as the Apogee Big Ben.For use with Apogee's: AD-16X, Big Ben, DA-16X, Rosetta 200, & Rosetta 800....details
Apogee Wyde Eye Cable - S/PDIF - RCA Coaxial 10 Meter
Use the Apogee Wyde Eye cable with Big Ben, Ensemble, Mini-DAC, Rosetta 200 and for other digital device connections that supports S/PDIF, DOLBY AC-3, and DTS on a 75 ohm coaxial connection. It creates a coaxial 75 ohm S/PDIF connection for 2 channels of digital In/Out and clock signals. S/PDIF supports 2 channels of digital audio at sample rates up to 192kHz....details
Apogee PC32-IFC - Symphony PCI Digital Interconnect Cable .5 Meter
This interconnect cable can be used to connect Apogee's Symphony PCI Card to Apogee's X-HD and X-Symphony expansion cards:Symphony PCI Card(sold separately): Introducing Symphony, a multi-channel PCI Express card designed specifically for use with Apple's Macintosh computers. Apogee's Symphony PCI Express card is a digital computer interface that is based on the PCI-Express architecture for Apple's Macintosh computers. Controlled by Apogee's Maestro software, Symphony features 32 channels of digital I/O on a single PCI-Express card format. With support for sample rates up to 192 kHz, Symphony can be used as a digital router or patch-bay when connected to external converters or other digital outboard equipment. Software drivers for Symphony feature extensive routing capabilities and very low latency performance making very high channel, high quality native recording with Apogee converters a reality. Symphony is the professional audio standard for native workstations. Maestro is an innovative software interface between OS X applications (OS 10.4 and above) and Apogee hardware. Maestro is capable of controlling Apogee hardware I/O connected to the computer via FireWire, Symphony, (Apogee's PCI Express card), or both at the same time. Maestro features, multiple low latency mixers, hardware control panels, an input/output routing matrix that is compatible with Rosetta 800, Rosetta 200, AD-16X and DA-16X and a universal control platform for using Apogee hardware in combination with Ensemble. X-HD Card (sold separately): The X-HD Card connects Apogee converters directly to Pro Tools HD and Accel core cards with no other hardware required. Apogee makes the direct connection to Pro Tools / HD systems a reality. The Apogee X-HD option card allows for direct connectivity between Pro Tools HD systems and Apogee's X-Series or Rosetta Series converters. The result is an incredibly powerful combination of Digidesign's' Pro Tools software and Apogee's superior conversion and clocking hardware. It features a primary HD port for connecting directly to HD Core or Accel cards, an expansion port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200), it's compatible with the latest versions of ProTools, and it may be used along side similar interfaces (such as the Digidesign 96 I/O, 192 I/O, Prism Dream ADA-8).X-Symphony Card (sold separately): X-Symphony Card connects Apogee converters to Apogee's Symphony64. Choose any combination of X-Series or Rosetta Series converters to build the heart of your Symphony System, add X-Symphony Cards, and connect directly to Symphony and your Mac Pro Computer. Features a primary port for connecting directly to Symphony PCI cards, and a thru port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200, up to 64-channels per Symphony Card).Choose your cable length!...details
Apogee PC32-IFC - Symphony PCI Digital Interconnect Cable 5 Meter
This interconnect cable can be used to connect Apogee's Symphony PCI Card to Apogee's X-HD and X-Symphony expansion cards:Symphony PCI Card(sold separately): Introducing Symphony, a multi-channel PCI Express card designed specifically for use with Apple's Macintosh computers. Apogee's Symphony PCI Express card is a digital computer interface that is based on the PCI-Express architecture for Apple's Macintosh computers. Controlled by Apogee's Maestro software, Symphony features 32 channels of digital I/O on a single PCI-Express card format. With support for sample rates up to 192 kHz, Symphony can be used as a digital router or patch-bay when connected to external converters or other digital outboard equipment. Software drivers for Symphony feature extensive routing capabilities and very low latency performance making very high channel, high quality native recording with Apogee converters a reality. Symphony is the professional audio standard for native workstations. Maestro is an innovative software interface between OS X applications (OS 10.4 and above) and Apogee hardware. Maestro is capable of controlling Apogee hardware I/O connected to the computer via FireWire, Symphony, (Apogee's PCI Express card), or both at the same time. Maestro features, multiple low latency mixers, hardware control panels, an input/output routing matrix that is compatible with Rosetta 800, Rosetta 200, AD-16X and DA-16X and a universal control platform for using Apogee hardware in combination with Ensemble. X-HD Card (sold separately): The X-HD Card connects Apogee converters directly to Pro Tools HD and Accel core cards with no other hardware required. Apogee makes the direct connection to Pro Tools / HD systems a reality. The Apogee X-HD option card allows for direct connectivity between Pro Tools HD systems and Apogee's X-Series or Rosetta Series converters. The result is an incredibly powerful combination of Digidesign's' Pro Tools software and Apogee's superior conversion and clocking hardware. It features a primary HD port for connecting directly to HD Core or Accel cards, an expansion port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200), it's compatible with the latest versions of ProTools, and it may be used along side similar interfaces (such as the Digidesign 96 I/O, 192 I/O, Prism Dream ADA-8).X-Symphony Card (sold separately): X-Symphony Card connects Apogee converters to Apogee's Symphony64. Choose any combination of X-Series or Rosetta Series converters to build the heart of your Symphony System, add X-Symphony Cards, and connect directly to Symphony and your Mac Pro Computer. Features a primary port for connecting directly to Symphony PCI cards, and a thru port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200, up to 64-channels per Symphony Card).Choose your cable length!...details
Apogee PC32-IFC - Symphony PCI Digital Interconnect Cable 3 Meter
This interconnect cable can be used to connect Apogee's Symphony PCI Card to Apogee's X-HD and X-Symphony expansion cards:Symphony PCI Card(sold separately): Introducing Symphony, a multi-channel PCI Express card designed specifically for use with Apple's Macintosh computers. Apogee's Symphony PCI Express card is a digital computer interface that is based on the PCI-Express architecture for Apple's Macintosh computers. Controlled by Apogee's Maestro software, Symphony features 32 channels of digital I/O on a single PCI-Express card format. With support for sample rates up to 192 kHz, Symphony can be used as a digital router or patch-bay when connected to external converters or other digital outboard equipment. Software drivers for Symphony feature extensive routing capabilities and very low latency performance making very high channel, high quality native recording with Apogee converters a reality. Symphony is the professional audio standard for native workstations. Maestro is an innovative software interface between OS X applications (OS 10.4 and above) and Apogee hardware. Maestro is capable of controlling Apogee hardware I/O connected to the computer via FireWire, Symphony, (Apogee's PCI Express card), or both at the same time. Maestro features, multiple low latency mixers, hardware control panels, an input/output routing matrix that is compatible with Rosetta 800, Rosetta 200, AD-16X and DA-16X and a universal control platform for using Apogee hardware in combination with Ensemble. X-HD Card (sold separately): The X-HD Card connects Apogee converters directly to Pro Tools HD and Accel core cards with no other hardware required. Apogee makes the direct connection to Pro Tools / HD systems a reality. The Apogee X-HD option card allows for direct connectivity between Pro Tools HD systems and Apogee's X-Series or Rosetta Series converters. The result is an incredibly powerful combination of Digidesign's' Pro Tools software and Apogee's superior conversion and clocking hardware. It features a primary HD port for connecting directly to HD Core or Accel cards, an expansion port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200), it's compatible with the latest versions of ProTools, and it may be used along side similar interfaces (such as the Digidesign 96 I/O, 192 I/O, Prism Dream ADA-8).X-Symphony Card (sold separately): X-Symphony Card connects Apogee converters to Apogee's Symphony64. Choose any combination of X-Series or Rosetta Series converters to build the heart of your Symphony System, add X-Symphony Cards, and connect directly to Symphony and your Mac Pro Computer. Features a primary port for connecting directly to Symphony PCI cards, and a thru port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200, up to 64-channels per Symphony Card).Choose your cable length!...details
Apogee PC32-IFC - Symphony PCI Digital Interconnect Cable 30 Meter
This interconnect cable can be used to connect Apogee's Symphony PCI Card to Apogee's X-HD and X-Symphony expansion cards:Symphony PCI Card(sold separately): Introducing Symphony, a multi-channel PCI Express card designed specifically for use with Apple's Macintosh computers. Apogee's Symphony PCI Express card is a digital computer interface that is based on the PCI-Express architecture for Apple's Macintosh computers. Controlled by Apogee's Maestro software, Symphony features 32 channels of digital I/O on a single PCI-Express card format. With support for sample rates up to 192 kHz, Symphony can be used as a digital router or patch-bay when connected to external converters or other digital outboard equipment. Software drivers for Symphony feature extensive routing capabilities and very low latency performance making very high channel, high quality native recording with Apogee converters a reality. Symphony is the professional audio standard for native workstations. Maestro is an innovative software interface between OS X applications (OS 10.4 and above) and Apogee hardware. Maestro is capable of controlling Apogee hardware I/O connected to the computer via FireWire, Symphony, (Apogee's PCI Express card), or both at the same time. Maestro features, multiple low latency mixers, hardware control panels, an input/output routing matrix that is compatible with Rosetta 800, Rosetta 200, AD-16X and DA-16X and a universal control platform for using Apogee hardware in combination with Ensemble. X-HD Card (sold separately): The X-HD Card connects Apogee converters directly to Pro Tools HD and Accel core cards with no other hardware required. Apogee makes the direct connection to Pro Tools / HD systems a reality. The Apogee X-HD option card allows for direct connectivity between Pro Tools HD systems and Apogee's X-Series or Rosetta Series converters. The result is an incredibly powerful combination of Digidesign's' Pro Tools software and Apogee's superior conversion and clocking hardware. It features a primary HD port for connecting directly to HD Core or Accel cards, an expansion port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200), it's compatible with the latest versions of ProTools, and it may be used along side similar interfaces (such as the Digidesign 96 I/O, 192 I/O, Prism Dream ADA-8).X-Symphony Card (sold separately): X-Symphony Card connects Apogee converters to Apogee's Symphony64. Choose any combination of X-Series or Rosetta Series converters to build the heart of your Symphony System, add X-Symphony Cards, and connect directly to Symphony and your Mac Pro Computer. Features a primary port for connecting directly to Symphony PCI cards, and a thru port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200, up to 64-channels per Symphony Card).Choose your cable length!...details
Apogee Analog Interconnect Cable DB25 to 8 XLR'S AD-8
The Apogee Analog Interconnect Cable has a DB25 connecter on one end and 8 XLR connectors on the other.AD8-IFC: For use with: AD-16X and ROSETTA 800 Format: Analog In Eight channel analog input connection with 8 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. All 8 channels are wired balanced as per the Tascam analog wiring standard. Thumbscrews are 2.6mm. Provides 8 analog XLR inputs to a DB-25 multipin connector for the Rosetta 800, the AD-16X, and any other device that supports the Tascam analog wiring format.DA8-IFC: For use with: DA-16X and ROSETTA 800 Format: Analog Out Eight channel analog output connection with 8 Neutrik XLR male connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. All 8 channels are wired balanced as per the Tascam analog wiring standard. Thumbscrews are 2.6mm. Provides 8 analog XLR outputs from a DB-25 multipin connector for the Rosetta 800, the DA-16X, and any other device that supports the Tascam analog wiring format....details
Apogee Analog Interconnect Cable DB25 to 8 XLR'S DA-8
The Apogee Analog Interconnect Cable has a DB25 connecter on one end and 8 XLR connectors on the other.AD8-IFC: For use with: AD-16X and ROSETTA 800 Format: Analog In Eight channel analog input connection with 8 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. All 8 channels are wired balanced as per the Tascam analog wiring standard. Thumbscrews are 2.6mm. Provides 8 analog XLR inputs to a DB-25 multipin connector for the Rosetta 800, the AD-16X, and any other device that supports the Tascam analog wiring format.DA8-IFC: For use with: DA-16X and ROSETTA 800 Format: Analog Out Eight channel analog output connection with 8 Neutrik XLR male connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. All 8 channels are wired balanced as per the Tascam analog wiring standard. Thumbscrews are 2.6mm. Provides 8 analog XLR outputs from a DB-25 multipin connector for the Rosetta 800, the DA-16X, and any other device that supports the Tascam analog wiring format....details
Apogee Symphony 64 PCIe Card for Mac
The Apogee Symphony 64 PCIe card for Mac is the core of Apogee's pro audio production Symphony System. With the flexibility of up to 64 channels of input and output, the Symphony 64 PCIe card doubles the amount of I/O previously available on one Symphony card. The Symphony 64 card is made to interface with Apogee's X-Series and Rosetta Series converters directly to the Mac Pro, which creates the Symphony System. And, the Symphony PCIe driver design provides an elegant and rock-solid connection capable of delivering incredibly low latency.The pairing of Apogee Symphony's superior driver performance and the brute strength of Apple's Mac Pro provides a superior foundation for any Core Audio-based studio and sets the stage for advanced technologies like Apogee Symphony's SBus and VBus....details
Apogee ONE USB Interface with Microphone
The Apogee ONE USB Interface is a pocket-sized music input device featuring the award winning sound quality that made Apogee Electronics famous. Designed to work easily with Apple's GarageBand, Logic, Final Cut, or any Core Audio compliant application, Apogee one helps you create professional recordings anywhere.With Apogee ONE, you can record a single channel of audio using the specially tuned enclosure microphone, an instrument input for guitar, bass, or keyboard, or a world-class microphone preamp input. Listening with ONE is an entirely new experience as well. Hear your recordings and your iTunes library with incredible dimension and clarity through ONE's studio-quality stereo output.It's an Apogee: Legendary Sound Quality at an Incredible Price If you've been in a commercial recording studio, you've probably seen Apogee gear. If you haven't, you've heard it. Apogee products are preferred by recording pros around the world and have set the industry standard in professional recording for over two decades. ONE makes the legendary quality of Apogee available in a portable form factor and at the lowest price ever for a premium computer recording interface.Take ONE Anywhere ONE is powered by a USB connection to your Mac and offers 24 bit audio at sample rates of 44.1 kHz or 48 kHz for pristine sound quality. With a footprint slightly larger than an iPhone, ONE's compact size is travel friendly, allowing you to record and perform professionally any place your music takes you.There's a Mic Inside: Tuned Aperture Microphone Technology Unlike any interface in its category, ONE features an internal reference condenser microphone that has been fine-tuned by professional recording engineers to create Apogee's Tuned Aperture Microphone™ technology. ONE with its tuned aperture microphone and fitted with the optional custom mic mount is the ultimate portable recording solution for quickly capturing musical ideas, recording high quality demos, rehearsals, podcasts, lectures, interviews, voice-overs and more.Choose your Mic: World-Class Mic Pre input For those who prefer the sound of their favorite microphone, ONE features a worldclass microphone preamp with phantom power and a gain range of +10 to 63 dB. Based on the award winning mic preamps in Apogee's Ensemble and Duet, ONE's preamp is digitally controlled by the encoder knob. Level can also be set from within Apogee's Maestro, or your Mac's Sound and Audio MIDI Setup control panels.Guitar, Bass and Keyboards: Instrument Inputs Plug-in and play is made easy with ONE's instrument input. Perfect for guitar, bass, and keyboard, ONE's instrument input has extremely low noise and a transparent signal path making it the ideal solution for recording or performing live with your Mac.Headphones or Speakers: Studio Quality Stereo Output Hear your recordings in their truest form and rediscover your iTunes library with ONE's studio quality ster...details
Apogee SYMPHONY I/O w 8X8 Optical
This cutting-edge recording package includes the amazing Apogee Symphony I/O Interface loaded with the 8 Analog I/O + 8 Optical I/O Module. Symphony I/O builds upon the award-winning design approaches of Apogee's X-Series and Rosetta Series converters, the Big Ben master clock and the Trak2 mic preamps. It also refines and updates these proven designs with fewer but more advanced components while optimizing their performance with efficient power distribution. These enhancements allow audio to travel through less circuitry, offering lower converter latency, more accurate clocking and even more transparency and clarity in your recordings.Analog design, the cornerstone of Apogee quality Apogee's engineers do not merely rely on specs and data sheets when selecting converter components, they listen. Each component is auditioned and carefully selected to best reflect the characteristics of the Apogee sound. Symphony I/O's audio path design is elegant and efficient, incorporating the most advanced op amps that offer better performance than multiple parts used in previous designs. This design improvement minimizes the audio path circuitry and maximizes sound quality. And in the tradition of the X-Series and Rosetta series, the entire audio path is DC coupled, resulting in ultra flat frequency response and extremely low phase error.Total Flexibility: Symphony I/O is built to grow with your studio Symphony I/O is an audio hardware platform, designed to deliver the most advanced recording technology available and the flexibility, scalability, and longevity required to power the modern studio. Modular I/O design, total software control, and direct connection to all popular DAWs make Symphony I/O a long-term sound investment.AIM for Complete Compatibility With a simple adjustment using the front panel encoder knobs, AIM transforms Symphony I/O into an interface optimized for the mode that's been selected.Symphony I/O's Audio Interface Modes (AIM) With a 2-step adjustment using a single front panel encoder knob, AIM transforms Symphony I/O into an interface optimized for the most popular audio workstation environments. This feature allows users of Logic and Pro Tools HD for example, to easily switch back and forth between the two DAWs with the click of a knob and swap of a cable. If USB is your preferred mode, connecting to Core Audio compatible apps like Digital Performer and Cubase is just as easy. And StandAlone mode calibrates Symphony I/O for simple and direct routing ideal for a variety of uses and applications including Pro Tools LE or Pro Tools M-Powered.Simply Switch Move between Symphony/Logic and Pro Tools HD on one workstation with ease and without compromise. Step up to a world that embraces Logic, Mac Based workstations and Pro Tools HD. Whatever platform you choose to work with the audio quality will Sound Amazing.The Symphony I/O PC-32 connector connects directly to a Symphony 64 card or a Pro Tools HD card. When using a L...details
Apogee Duet Recording Package ¹
The Apogee Duet Package comes with the following recording equipment: the Apogee Duet FireWire interface, Apple Logic Express 9 DAW software, Fostex PM0.4 powered studio monitors – pair, Audio-Technica AT2041SP – AT2020 and AT2021 microphone pack, 2x MS-220 tripod mic stands with fixed booms, 2x 5 ft. TRS balanced patch cables, and 2x 20 ft. XLR microphone cables.Apogee Duet FireWire Interface The Duet is a two-channel FireWire audio interface that features the amazing sound quality that made Apogee Electronics famous. With control functions built directly into Apple's Logic Pro, Soundtrack Pro and GarageBand software, Duet empowers you to create professional recordings effortlessly on your Mac.With Apogee Duet, you can plug in guitars, keyboards, and microphones to record your music, or simply experience how much better your favorite tracks in iTunes sound. Duet is compact and powered by FireWire, so you can pack up your studio and go anywhere your music takes you.Its dual, 1/4" high impedance inputs allow you to combine and record your two favorite instruments, whether it be two guitars, one bass, one guitar, etc., simultaneously using your favorite Core Audio-compatible application. You can also capture vocals with two microphone inputs that have phantom power and 75dB of gain. Whether you're noodling out new ideas, completing a personal tune, documenting a podcast, or recording a live performance, your new little buddy can handle it. The flexible breakout cables come with icons to make it easy to know what goes where, keeping everything in order, out of the way, and properly connected for maximum input and output, with minimal mess. Apogee Duet's bus-powered FireWire interface frees you from the traditional four-wall studio setting. So grab your laptop, find a spot where inspiration takes you, whether it's in the solace of a park or in the echoey confines of a subway tunnel, turn this audio interface on, and start doing your thing.If you don't have Logic Pro, Soundtrack Pro, Garageband, don't panic. Apogee includes it's own Maestro software, so you'll still be able to work with any Core Audio-compatible application. Maestro allows you to turn the Duet's multifunction control knob into a one-click manager. Maestro will help you manage all of Duet's capabilities and settings, including I/O level, source selection, muting, mic/instrument gain mode, assign MIDI function controls to the controller knob, assign meter display, and more. Speaking of meter display, Duet comes with LED I/O meters to help you monitor your levels for maximum effectiveness. Duet is not only great for it's input and interface functions, but it delivers amazing sound quality as well. Whether you're listening to your iTunes collection or latest composition through powered speakers connected to the 1/4" outputs or via the headphone jack, you'll not be disappointed by the crystal clear, playback perform...details
Apogee GiO USB Guitar Interface and Controller &mdash: for the Mac
The Apogee GiO is the complete guitar interface for Apple's Logic Studio 9, MainStage 2 and GarageBand '09. Combining effects control, recording functions and amazing sound quality, the GiO delivers total access to incredible sounding guitar amps and effects in a single foot controller and audio interface.Designed to work with the Apple Logic Studio 9 and MainStage 2, GiO allows guitar players to control recording functions, preset changes and plug-ins like Amp Designer and Pedalboard, along with Playback and Loopback features in MainStage. With GarageBand '09, Apogee GiO is truly plug-and-play pedal and lets users quickly connect their guitar, select and control built-in amps and stompboxes, and record.Stomp on it. Effects control without the mouse. Find your sound without going back and forth from your guitar to your Mac. With GiO, you can audition effects presets in GarageBand, Logic, and MainStage, and turn effects on and off while playing or recording . . . all without touching your keyboard.Hands-free recording. Apogee GiO frees you from key-command recording allowing you to concentrate on your performance and not the space bar. The five transport buttons on GiO let you record, play, stop and quickly navigate through your track without taking your hands off the neck of your guitar."Next" preset please. Previous and Next preset select buttons let you quickly audition and toggle between guitar amps and effects presets in Logic and GarageBand and the patch lists in MainStage.Instrument input GiO's ¼" instrument input features Apogee's world-class instrument preamp and converters. Hear and record your guitar's true tone straight into Apple's GarageBand, Logic and MainStage without compromise. The Apogee GiO is optimized for all pickup configurations from the most basic single coil to sophisticated active electronics setups.MIDI Expression pedal input GiO's Expression control pedal input allows access to traditional effects like wah-wah, and volume. Also, control effects parameters like the length of a delay or the speed of a tremolo. (Expression Control Pedal not included)USB GiO is fully powered by the USB connection to your Mac eliminating the need for an external power source. Simply plug into an available USB port on any Mac and you're ready to go.Output: Headphones, monitors or instrument amplifier Hear your guitar and recording like never before. Connect your headphones, powered monitors or instrument amplifier to Apogee converters via GiO's ¼" stereo output and listen to your guitar and mix with incredible clarity and dimension....details
Apogee 8 Mic Pre Amp
The Apogee 8 Mic Preamp Module is part of the Symphony I/O Interface system. The Mic Preamp Module upgrades the functionality of any Analog I/O Module by adding 8 mic preamps to the existing line inputs. A direct connection between the Mic Preamp Module and the Analog I/O Module inserts a mic preamp stage before the line inputs. This impressive module offers 8 Mic preamps with 4 instrument inputs and 8 insert points....details
Apogee 16 Analog Out + 16 Optical In
The Apogee I/O Modules are the sound and soul of the Apogee Symphony I/O interface, and represent 25 years of Apogee research & development, and design excellence. The AO16 module offers 16 channels of analog output and up to 16 channels of analog AND digital input simultaneously. Optical input accepts ADAT (16 channels), SMUX (8 channels), and SPDIF (4 channels) formats. Two RCA connectors supports SPDIF IN/OUT. This powerful module delivers Apogee's core competency and superior sounding digital audio recording....details
Apogee SYMPHONY I/O CHASSIS (with 2 open Module Positions)
Symphony I/O builds upon the award-winning design approaches of Apogee's X-Series and Rosetta Series converters, the Big Ben master clock and the Trak2 mic preamps. It also refines and updates these proven designs with fewer but more advanced components while optimizing their performance with efficient power distribution. These enhancements allow audio to travel through less circuitry, offering lower converter latency, more accurate clocking and even more transparency and clarity in your recordings.Analog design, the cornerstone of Apogee quality Apogee's engineers do not merely rely on specs and data sheets when selecting converter components, they listen. Each component is auditioned and carefully selected to best reflect the characteristics of the Apogee sound. Symphony I/O's audio path design is elegant and efficient, incorporating the most advanced op amps that offer better performance than multiple parts used in previous designs. This design improvement minimizes the audio path circuitry and maximizes sound quality. And in the tradition of the X-Series and Rosetta series, the entire audio path is DC coupled, resulting in ultra flat frequency response and extremely low phase error.Total Flexibility: Symphony I/O is built to grow with your studio Symphony I/O is an audio hardware platform, designed to deliver the most advanced recording technology available and the flexibility, scalability, and longevity required to power the modern studio. Modular I/O design, total software control, and direct connection to all popular DAWs make Symphony I/O a long-term sound investment.AIM for Complete Compatibility With a simple adjustment using the front panel encoder knobs, AIM transforms Symphony I/O into an interface optimized for the mode that's been selected.Symphony I/O's Audio Interface Modes (AIM) With a 2-step adjustment using a single front panel encoder knob, AIM transforms Symphony I/O into an interface optimized for the most popular audio workstation environments. This feature allows users of Logic and Pro Tools HD for example, to easily switch back and forth between the two DAWs with the click of a knob and swap of a cable. If USB is your preferred mode, connecting to Core Audio compatible apps like Digital Performer and Cubase is just as easy. And StandAlone mode calibrates Symphony I/O for simple and direct routing ideal for a variety of uses and applications including Pro Tools LE or Pro Tools M-Powered.Simply Switch Move between Symphony/Logic and Pro Tools HD on one workstation with ease and without compromise. Step up to a world that embraces Logic, Mac Based workstations and Pro Tools HD. Whatever platform you choose to work with the audio quality will Sound Amazing.The Symphony I/O PC-32 connector connects directly to a Symphony 64 card or a Pro Tools HD card. When using a Logic Studio Mac based system, latency is below 1.8msCompose your Symphony: Custom I/O configurations With 5 available I/O Modules, you can c...details
Apogee 8 Analog I/O + 8 Optical I/O
The Apogee I/O Modules are the sound and soul of the Apogee Symphony I/O interface, and represent 25 years of Apogee research & development, and design excellence. The A8OP module offers 8 channels of analog inputs and up to 8 channels of analog AND optical outputs simultaneously. This powerful module delivers Apogee's core competency and superior sounding digital audio recording....details
Apogee 16 Analog In + 16 Optical Out
The Apogee I/O Modules are the sound and soul of the Apogee Symphony I/O interface, and represent 25 years of Apogee research & development, and design excellence. The AI16 offers 16 channels of analog input and up to 16 channels of optical output simultaneously. This powerful module delivers Apogee's core competency and superior sounding digital audio recording....details
Apogee SYMPHONY I/O w 8X8 AES
This cutting-edge recording package includes the amazing Apogee Symphony I/O Interface loaded with the 8 Analog I/O + 8 AES I/O Module. Symphony I/O builds upon the award-winning design approaches of Apogee's X-Series and Rosetta Series converters, the Big Ben master clock and the Trak2 mic preamps. It also refines and updates these proven designs with fewer but more advanced components while optimizing their performance with efficient power distribution. These enhancements allow audio to travel through less circuitry, offering lower converter latency, more accurate clocking and even more transparency and clarity in your recordings.Analog design, the cornerstone of Apogee quality Apogee's engineers do not merely rely on specs and data sheets when selecting converter components, they listen. Each component is auditioned and carefully selected to best reflect the characteristics of the Apogee sound. Symphony I/O's audio path design is elegant and efficient, incorporating the most advanced op amps that offer better performance than multiple parts used in previous designs. This design improvement minimizes the audio path circuitry and maximizes sound quality. And in the tradition of the X-Series and Rosetta series, the entire audio path is DC coupled, resulting in ultra flat frequency response and extremely low phase error.Total Flexibility: Symphony I/O is built to grow with your studio Symphony I/O is an audio hardware platform, designed to deliver the most advanced recording technology available and the flexibility, scalability, and longevity required to power the modern studio. Modular I/O design, total software control, and direct connection to all popular DAWs make Symphony I/O a long-term sound investment.AIM for Complete Compatibility With a simple adjustment using the front panel encoder knobs, AIM transforms Symphony I/O into an interface optimized for the mode that's been selected.Symphony I/O's Audio Interface Modes (AIM) With a 2-step adjustment using a single front panel encoder knob, AIM transforms Symphony I/O into an interface optimized for the most popular audio workstation environments. This feature allows users of Logic and Pro Tools HD for example, to easily switch back and forth between the two DAWs with the click of a knob and swap of a cable. If USB is your preferred mode, connecting to Core Audio compatible apps like Digital Performer and Cubase is just as easy. And StandAlone mode calibrates Symphony I/O for simple and direct routing ideal for a variety of uses and applications including Pro Tools LE or Pro Tools M-Powered.Simply Switch Move between Symphony/Logic and Pro Tools HD on one workstation with ease and without compromise. Step up to a world that embraces Logic, Mac Based workstations and Pro Tools HD. Whatever platform you choose to work with the audio quality will Sound Amazing.The Symphony I/O PC-32 connector connects directly to a Symphony 64 card or a Pro Tools HD card. When using a Logic...details
Apogee 8 Analog I/O + 8 AES I/O
The Apogee I/O Modules are the sound and soul of the Apogee Symphony I/O interface, and represent 25 years of Apogee research & development, and design excellence. The SIOC-A8AE module offers 8 channels of analog input and up to 8 channels of analog AND AES output simultaneously. This powerful module delivers Apogee's core competency and superior sounding digital audio recording....details
|
