B-52

"B-52 LX-1515V3 1000W Dual 15" PA Speaker"
The B-52 LX-1515V3 1000W Dual 15" PA Speaker is a full-range system featuring a quasi 3-way design. The LX-15153 has a sophisticated tapered array crossover network which directs low frequencies to both 15" speakers while limiting the midrange to only the top woofer. The result is improved low-end and clearer sound in the high frequency range. The PA speaker's ultra-efficient compression driver, mounted to a custom elliptical waveguide, delivers smooth mids and vivid highs that won't fatigue your ears.Comp-4CLB compression driver The B-52 LX-1515V3 uses the COMP-4CLB 1" exit PETP film diaphragm compression driver, providing smooth mids and extended high-frequency reproduction.Elliptical wave guideWave Guide B-52's new elliptical waveguide perfectly complements the COMP-4CLB compression driver. The coverage is uniform over more than 3 octaves and the overall response is smooth and extended. The asymmetrical shape allows close physical coupling to the woofer and a slight tilt of the sound down to the listening level.Advanced Crossover The B-52 LX-1515V3 has an advanced tapered array crossover network design that directs low frequencies to both 15" speakers while limiting the midrange to just the top woofer, resulting in improved low-end and cleaner sound in the high-frequency range. The crossover utilizes low-loss components including Mylar capacitors, air-core inductors, and ceramic resistors. Light-bulb tweeter protection circuitry is included.Construction The B-52 LX-1515V3 is fitted with metal bar handles, protective metal corners, rubber feet, a 16-gauge perforated steel grille, 3" tilt back casters, and is finished with impact-forgiving black carpet. B-52 offers a LIFETIME cabinet construction warranty. Input connections: (2) ¼" phone jacks and (1) Neutrik™ Speakon™ connector....details

"B-52 15-120 15" 400W Stamped Frame Loudspeaker"
Each transducer is built to engineering perfection using the most innovative design concepts and materials. Every component of B-52 loudspeakers are manufactured to maximum tolerances by some of the most well-respected engineers in the world. All B-52 loudspeakers are subjected to a wide array of quality-assurance tests during and post assembly. It's for these reasons that B-52 speakers typically have a 0.2% return rate and are backed by a five-year warranty....details

B-52 LS100 and LS412A Half Stack
This B-52 half stack includes the LS-100 100W Guitar Amp Head and the LS-412 400W 4x12 Guitar Extension Cabinet.LS-100 100W Guitar Amp HeadThe B-52 LS-100 Guitar Amp Head represents the latest in the ever expanding line of highly acclaimed B-52 guitar amps. Friendly features combined with the latest advancements in preamp technology makes the LS-100 amp head an outstanding choice for the professional player and the weekend warrior. The clean channel now has the exclusive B-52 "Mid Cut" feature. This push-button allows you to select the classic, warm vintage sound or a pristine, almost acoustic-like tone with tons of headroom. The overdrive channels go from moderate classic breakup to monstrous gain, totally controllable thanks to the individual gain and master controls for each overdrive mode. The overdrive channels now feature the new, B-52 assignable Contour control. This allows you to preset the Contour control and have it automatically activate on the gain channel of your choice. You can set one overdrive channel for a punchy midrange tone with the Contour off and turn the Contour on the other overdrive channel for a massive, totally scooped out metal tone.Whether you are playing to a stadium crowd of 50,000 or practicing at home in your garage, the LS-100 will produce awesome crunch, smooth mids and crystal-clean highs. It is also capable of producing massive amounts of distortion, perfect for any style from blues to metal.LS-412 400W 4x12 Guitar Extension CabinetLoaded with four custom B-52 speakers with a power handling of 400 watts, the LS-412 guitar speaker provides outstanding headroom and tonal clarity. This 4 x 12" cabinet is rear ported for extreme low end. It provides crystal clear highs and heavy distortion with classic breakup....details

B-52 LG-7512 75W 12 Solid State Guitar Combo
This combo features Overdrive and Clean channels with modern tone. Independent level controls for bass, treble, mids and gain are provided on each channel, and it has a master volume and reverb. The Overdrive Channel offers a Gain 1 and Gain 2 with a contour control. It includes a rugged footswitch and detachable casters. The footswitch controls channel select, reverb, and the gain select....details

B-52 LS-100 100W Guitar Amp Head Black
The B-52 LS-100 Guitar Amp Head represents the latest in the ever expanding line of highly acclaimed B-52 guitar amps. Friendly features combined with the latest advancements in preamp technology makes the LS-100 amp head an outstanding choice for the professional player and the weekend warrior. The clean channel now has the exclusive B-52 "Mid Cut" feature. This push-button allows you to select the classic, warm vintage sound or a pristine, almost acoustic-like tone with tons of headroom. The overdrive channels go from moderate classic breakup to monstrous gain, totally controllable thanks to the individual gain and master controls for each overdrive mode. The overdrive channels now feature the new, B-52 assignable Contour control. This allows you to preset the Contour control and have it automatically activate on the gain channel of your choice. You can set one overdrive channel for a punchy midrange tone with the Contour off and turn the Contour on the other overdrive channel for a massive, totally scooped out metal tone.Whether you are playing to a stadium crowd of 50,000 or practicing at home in your garage, the LS-100 will produce awesome crunch, smooth mids and crystal-clean highs. It is also capable of producing massive amounts of distortion, perfect for any style from blues to metal....details

B-52 US-1200 Power Amp
The B-52 US-1200 Power Amp has low noise, low distortion circuitry, and high current output stages. B-52 uses oversized toroidial transformers and large filter capacitors to deliver super-clean, fist-pumping output even when driving 2-ohm speaker loads. The stellar looking US-Series professional power amplifiers are made to outperform in any setting. B-52 US-series power amplifiers use the most reliable linear output devices, which provide ultralow distortion and ruler-flat frequency response. Backed by a 3-year warranty....details

B-52 LX-18EV3 1000W Folded Subwoofer
The powerful 1000W B-52 LX-18EV3 Folded Subwoofer delivers intense long-throw bass while remaining a mobile and extremely affordable speaker. The LX18EV3 is ideal for live sound and music replay applications. The LX-18EV3 features the B-52 18-220X subwoofer. The cabinet, made in the US, features 7-layer 3/4" plywood construction, reinforced internal bracings, and is finished with impact forgiving black carpet and 4" heavy-duty casters.The speaker's 18" subwoofers are housed in a compression chamber that minimizes the excursion of the driver while maximizing the subwoofers' output. The optimally-sized acoustic aperture of the compression chambers forms the throat of the horn and helps force the air at an increased velocity and pressure. The LX-18EV3 subwoofer's compression chamber optimizes the horn's output, allowing for amazing output levels.All B-52 folded-horn cabinets are loaded with the new B-52 18-220X subwoofer which provides high-power handling, great efficiency, very low distortion, and accurate sound reproduction. Key features include:•4-inch "inside/outside" voice coil wound on both sides of the glass fiber coil former, providing more effective cooling through greater air contact •The light weight and robust cast aluminum frame is shaped to minimize reflections on the back of the cone •The entire loudspeaker is designed to work as a "heat sink" for extreme cooling efficiency •The advanced magnet topology ensures an even distribution of magnetic flux throughout the whole magnet assembly, resulting in symmetrical motor movement that prevents stray flux which can cause interference •The glass-fiber impregnated cone incorporates a sealed surround and added edge-damping to greatly reduce the occurrence of unwanted cone resonances •The vented magnet ensures constant air circulation to drive heat away from the magnet assembly...details

B-52 US-3000 Power Amplifier
The B-52 US-3000 Power Amplifier features low-noise, low-distortion circuitry and high-current output stages, toroidal transformers, and large filter capacitors to deliver super-clean, fist-pumping output even when driving 2-ohm speaker loads. Its highly reliable linear output devices provide ultra-low distortion and ruler flat frequency response. Backed by a 3-year warranty....details

B-52 US-4000 Power Amplifier
The B-52 US-4000 Power Amplifier features low noise, low distortion circuitry and high current output stages. B-52 uses oversized toroidal transformers and large filter capacitors to deliver super clean, fist pumping output even when driving a 2-ohm speaker load. All B-52 US-series power amplifiers use the most reliable linear output devices to provide ultra-low distortion and ruler flat frequency response. The stellar looking B-52 US-Series professional power amplifiers are made to outperform in any setting. Backed by a 3-year warranty....details

B-52 ATX-100 100W Tube Guitar Amp Head Black
The B-52 ATX-100 tube amp head is perfect for guitarists of every level. Whether you are playing to a stadium crowd of 50,000 or practicing at home in your garage, the ATX will produce awesome crunch, smooth mids, and crystal-clear highs. The B-52 ATX-100 has a 100% pure all-tube signal path, incredible tone, and an array of friendly features. It combines the superb tone and punch of a matched quartet of Sovtek 5881 power tubes with specially selected 12AX7 preamp tubes for solid tube tone and reliability. This roadworthy amp head provides the serious musician with monstrous gain, an extreme range of tone options and a sparkling clean channel. The three-channel B-52 ATX will take you from shimmering cleans with just the right touch of its lush spring reverb, to an all-out metal assault. The clean channel is designed to stay clean all the way up unless you push the master volume to get that nice warm power tube break-up. The clean channel features a volume, responsive 3-band EQ as well as a bright switch. The B-52 head's overdrive section features 2 channels with separate volume and gain controls that share a 3-band EQ. The newly designed mid-cut feature is assignable to either of the overdrive channels giving you the ability for a brutal rhythm channel and a searing lead tone. All channels share a master volume, low-res (resonance) and reverb control....details

B-52 US-1800 Power Amplifier
The B-52 US-1800 Power Amplifier features low noise, low distortion circuitry and high current output stages. It uses oversized toroidial transformers and large filter capacitors to deliver super clean, fist pumping output even when driving 2-ohm speaker loads. All B-52 US-series power amplifiers use the most reliable linear output devices for ultralow distortion and ruler flat frequency response. The stellar looking B-52 US-Series professional power amplifiers are made to outperform in any setting. Backed by a 3-year warranty....details

B-52 LS-412 400W 4x12 Guitar Extension Cabinet Slant
Loaded with four custom B-52 speakers with a power handling of 400 watts, the LS-412 guitar speaker provides outstanding headroom and tonal clarity. This 4 x 12" cabinet is rear ported for extreme low end. It provides crystal clear highs and heavy distortion with classic breakup....details

B-52 Matrix 2000 Speaker Sound System
The B-52 Matrix 2000 Speaker Sound System consists of 2 - 12" 2-way speakers, an 18" subwoofer with a 3-channel amplifier, and circuitry housed in a separate compartment on the sub unit's back. A 600W amp drives the subs, and 2 - 300W amps drive the 2-ways. All of the components are matched for the best possible sound and balance with minimal tweaking. All you have to do is connect the B-52 Matrix 2000 system components, plug in the power cord, plug in your mixer or other sound source, and you're ready to go!The B-52 subwoofer enclosure is divided into 2 separate compartments. The front chamber serves as the cabinet for the cast-frame, 4" voice coil and 18" subwoofer. The rear chamber houses all of the system's electronic circuitry, which includes the amplification for all 3 components, power supply, compressor, and preamps. The B-52 subwoofer has a power handling capability of 600W and a nominal impedance of 8 ohms.Each 12" 2-way Matrix 2000 speaker is loaded with a B-52 custom-designed 12" woofer and a 1" titanium diaphragm compression driver, mounted to a 90° x 40° constant directivity horn. The speakers can be pole mounted, used as stage monitors, or flown with built-in 3/8"—16 TPI hardware for permanent installations. For transport, they mount onto the subwoofer's front grille. Transporting the B-52 Matrix system is easy: Move the subwoofer onto its casters and place the included cover over the subwoofer. Next, pull the included covers over the satellite speakers and close the zippers. It is recommended that you transport the subwoofer and satellites separately. You may transport all the components at the same time by placing the satellite speakers onto the subwoofer's front panel facing down. Secure the satellite speakers to the subwoofer with the included locking strap by fastening it to the bar handles on the side of the subwoofer cabinet.The B-52 Matrix 2000 Speaker Sound System has a limited lifetime warranty on cabs and compression drivers; 5-year warranty on speakers; 2-year warranty on amplifiers....details

B-52 ST-412 280W 4x12 Guitar Cabinet with Celestion Vintage 30s Angled
The heart and soul of the B-52 ST-412 280W 4x12 Guitar Cabinet are 4 Celestion Vintage 30 speakers. The combination of B-52's 25 years of cabinet building know-how and the unrivaled tone of Celestion speakers unite to produce an outstanding and extremely portable 4x12 guitar cabinet. A 16 ohm stereo/8 ohm mono switch is provided for additional flexibility. B-52 uses 13-ply Baltic birch construction, 240W handling, detachable casters, and reinforced corners on the ST-412 guitar cab....details

B-52 ST-412 280W 4x12 Guitar Cabinet with Celestion Vintage 30s Straight
The heart and soul of the B-52 ST-412 280W 4x12 Guitar Cabinet are 4 Celestion Vintage 30 speakers. The combination of B-52's 25 years of cabinet building know-how and the unrivaled tone of Celestion speakers unite to produce an outstanding and extremely portable 4x12 guitar cabinet. A 16 ohm stereo/8 ohm mono switch is provided for additional flexibility. B-52 uses 13-ply Baltic birch construction, 240W handling, detachable casters, and reinforced corners on the ST-412 guitar cab....details

"B-52 LX-218 18" 2-Way Loudspeaker"
The B-52 LX-218 is a pounding 550W 18" 2-way speaker designed for mobile live sound and music replay applications and is the perfect companion for the LX-18 or LX-18A. Ideal for bands, medium-sized venue installations, corporate A/V, or mobile DJs, the LX-218 loudspeaker combines high-output and sound clarity with crisp highs and deep, well-defined bass.This B-52 speaker produces an exceptional full-range response, from thundering lows to crisp highs. The B-52 18-180 cast-aluminum framed loudspeaker with a 3.5" polyamide voice coil has tremendous output that allows you to both hear and feel the music. The customized built-in passive crossover perfectly mates the loudspeaker and high-frequency driver without losing essential midrange reproduction....details

B-52 MX-1515 Dual 15 2-Way 600W Speaker
The B-52 MX-1515 speaker from the MX-Series combines substantial SPL handling and accuracy from a very compact 2-way cabinet. The 1" exit titanium compression driver delivers smooth and detailed highs while the dual B-52 15-85 woofers produce tight, punchy low end. The MX-1515 audio speaker can be used as a stand-alone system or in combination with the MX-18S subwoofer.The B-52 speaker is designed for live sound, small venue installations and mobile DJ/KJs. B-52 components include high-performance loudspeakers and 1" exit titanium diaphragm compression drivers. Each rugged cabinet features metal bar handles, 16-gauge perforated steel grille, rubber feet and protective metal corners. Input connectors include 2 - 1/4" metal phone jacks and a genuine Neutrik NL4 connector. Each speaker enclosure is finished with impact-resistant black carpet....details

"B-52 MX-15 15" 2-Way 300W Passive Speaker"
The B-52 MX-15 15" 2-Way 300W Speaker is ideal for live sound and music replay with 40Hz-19kHz frequency response and superior sonic accuracy. The MX-15 features a high-performance 15" loudspeaker and 1" exit titanium diaphragm compression driver. The MX-15's rugged cabinet features metal bar handles, 16-gauge perforated steel grille, rubber feet, and protective metal corners. Finished with impact-resistant black carpet. Input connectors include 2 - 1/4" metal phone jacks and a genuine Neutrik NL4 connector. A polemount adapter allows the B-52 MX-15 to play above a crowd with strong projection....details

"B-52 MX-18S 18" 550W Subwoofer"
Extend the low-frequency response of any MX series full-range system to its lowest octave with the B-52 MX-18S 18" 550W Subwoofer. The MX-18S uses an American-made cast-frame 18" subwoofer with a 3.5" high-temperature polyamide voice coil. The rugged speaker cabinet features metal bar handles, 16-gauge perforated steel grille, rubber feet, and protective metal corners. Finished with impact-resistant black carpet. Input connectors include 2 - 1/4" metal phone jacks and a genuine Neutrik NL4 connector. The B-52 subwoofer speaker has a polemount adapter that makes it easy to install a metal tube to support the MX-15....details

"B-52 MX-MN 15 15" 2-Way Stage Monitor"
The B-52 MX-MN 15 is the ideal short-to-medium-distance stage monitor that provides 2 discrete angles. It uses a B-52 15-85 woofer with a 2-1/2" polyamide voice coil, and a 1"-exit titanium compression driver mounted on a constant directivity horn to produce big sound with 300W power handling capability. The rugged speaker cabinet from B-52's MX series features metal bar handles, 16-gauge perforated steel grille, rubber feet, and protective metal corners. Input connectors include 2 - 1/4" phone jacks and a genuine Neutrik NL4 connector.ÿCovered with impact-resistant black carpet....details

B-52 Matrix-1000 V2 700W Active 3-Piece Speaker System
The B-52 Matrix-1000 V2 Speaker System comes with 2 10" 2-way powered satellites and a dedicated powered 15" subwoofer. The Matrix-1000 V2 has a built-in 3-channel 700W power amplifier, 3 independent volume controls, electronic crossover with equalization, and VCA compressor. The circuitry is designed and fine-tuned to integrate all components for the best possible sound. There is no need to tweak or finesse settings on a crossover or compressor to make your system sound great. Simply roll the system into place on its heavy duty casters, plug in the AC, connect the two speaker cables, run two XLR cables to your mixer and you're ready to goBuilt-in 3-channel amplifier The 15" subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the 15" subwoofer. The rear chamber houses all of the system's electronic circuitry, which includes the amplification for all three components, power supply and preamps. The 15" subwoofer has a power handling capability of 400 watts and a nominal impedance of 8 ohms.10" satellite speakers The B-52 Matrix-1000 V2 satellites are loaded with a custom designed 10" speaker and 1" titanium diaphragm compression driver. The "horn" is a 90 x 60 elliptical waveguide that can be rotated 90° to optimize the dispersion pattern to best suit your particular application. These versatile B-52 speakers are pole-mountable and can sit as stage monitors. They also include 3/8"—16 tpi flying hardware for small venue permanent installations. The rounded front of the satellite speaker is a perfect fit for the convex face of the subwoofer, allowing you to stack, roll and transport the entire Matrix-1000 V2 in and out of a venue in record time.Transporting the system To transport the B-52 Matrix-1000 V2, simply set the subwoofer on its casters and place the satellite speakers on to the subwoofer's front panel, facing down. Fasten the satellites with the included locking strap using the handles on either side of the subwoofer cabinet. Place the included cover over the entire PA speaker system and you're ready to move the Matrix-1000 V2 with ease.Suggested applications: Mobile DJ * Karaoke * Nightclub, Restaurant, Bar Install * Corporate Audio / Video * Home Entertainment System * Live Sound System * Stage Monitoring System * Booth Monitoring System * Drum Monitoring...details

"B-52 ACT-1515X Active Dual 15" 2-Way 1000W Speaker"
The highly sophisticated compression circuitry in the B-52 ACT-1515X loudspeaker allows for impressively high SPLs while minimizing the risk of damage to either the amplifier or loudspeakers. The ACT amplifier employs sophisticated circuitry including four stages of equalization, a built-in compressor, limiter and short circuit / over-current protection. The B-52 speaker has four-stage equalization network built into the amplifier is the perfect complement to the system's dual 15" loudspeaker components....details

"B-52 ACT-18X Active 18" 1200W Subwoofer"
The B-52 ACT-18X Active 18" subwoofer has a digital sub amplifier powerful enough to drive an additional passive subwoofer. The speaker's built-in circuitry eliminates the need for additional components such as rackmount power amplifiers, electronic crossovers, compressor and limiters. Roadworthy black paint finish....details

B-52 Matrix-200 200W 3-Piece Active PA system
Compact, powerful, and portable the MATRIX-200 Active Speaker PA System delivers clean, accurate sound ideal for both stage and music playback applications. The MATRIX-200 has a true 200W stereo amplifier, built-in five-channel mixer, studio-quality digital effects, phantom power, and numerous patch inputs and outputs....details

B-52 Matrix 600 PA System
The Matrix 600 speakers deliver clean and accurate sound ideal for both live sound and music playback applications. At the heart of the B-52 Matrix 600 PA system is a high-quality 600W RMS stereo amplifier designed to perfectly match the included satellite speakers. The system also includes a built-in 7-channel mixer, studio-quality DSP effects, 48V phantom power, and ample patch inputs/outputs. The Matrix 600 satellite speakers boast a high-fidelity 10" 3-way design that reproduces sound with a detail and clarity, traditionally unattainable with a 2-way speaker. The PA speakers include both pole mounting cups and suspension points ideal for permanent installations. Covers for the Matrix 600 speakers, carrying bag for the mixer/amplifier, and cables are included....details

"B-52 18-220S 18" 1000W Cast Frame Subwoofer Speaker"
The 18-220S 18" Cast Frame Subwoofer Speaker is built to engineering perfection using the most innovative design concepts and materials. B-52 transducers are manufactured to maximum tolerances by some of the most well-respected engineers in the world. All loudspeakers are subjected to a wide array of quality-assurance tests during and post assembly. It's for these reasons that B-52 speakers typically have a 0.2% return rate and are backed by a five-year warranty....details

"B-52 COMP-4CLS 1" Exit Compression Driver &mdash Screw-On"
The COMP-4CLS is a 1" Exit Compression Driver that features a titanium diaphragm and is mounted with screws. The voice coil diameter is 1.75". This compression driver is built to engineering perfection using the most innovative design concepts and materials. B-52 transducers are manufactured to maximum tolerances by some of the most well-respected engineers in the world. All loudspeakers are subjected to a wide array of quality-assurance tests during and post assembly. It's for these reasons that B-52 speakers typically have a 0.2% return rate and are backed by a five-year warranty....details

B-52 Prodigy FX DJ Workstation
The Prodigy FX is an all-in-one solution that will elevate your performance to the next level. It's loaded with features that every DJ needs and wants including a wide array of DSP effects with parameter controls, master tempo, sampler, hot cues, integrated fader start, three-band EQ on every channel with kill switches, 3 microphone inputs with dedicated DSP reverb, dual rail Accutrack VCA crossfader, crossfader curve control, seamless loop, effects loop and CD direct outputs and mixer inputs for use with Serato Scratch Live, Synchroscience TORQ and all other time coded systems. Plus the included ATA case makes it a breeze to take it anywhere!...details

B-52 Prodigy Case
The B-52 Prodigy ATA Flight Case is purpose-built to protect and transport the B-52 Prodigy All-in-One Workstation. The case measures W26-5/8"W x 4-11/16"H x 13-5/8"D....details

B-52 Prodigy Dual CD/MP3 DJ Workstation
The B-52 Prodigy is a precision crafted professional DJ workstation designed to satisfy the most demanding performer — you! B-52's innovative console design features two scratching CD/MP3 players with touch sensitive jog wheels and a high performance 4-channel VCA mixer.The Prodigy workstation is loaded with features you need and want including pitch control and master tempo, hot cues, integrated fader start, 3-band EQ on every channel, 2 mic inputs, crossfader curve control, seamless loop, effects loop, CD direct outputs and mixer inputs for use with Serato Scratch Live, Synchroscience TORQ and all other time coded systems....details