B-Band
B-Band DM-T Single Tom Drum Microphone ¹ and other B-Band products for sale online.
B-Band DM-T Single Tom Drum Microphone ¹
It seems that the coolest thing in drum miking to come down the pike of late is the B-Band DM-T Drum Contact Mic for toms. Based on nanotechnology, the DM-T tom mic is a remarkable new way to get an amplified acoustic sound from your drums. Manufactured in the spirit of true acoustic instrument aficionados, the system consists of the DM-T preamp and the DST contact mic. The DM-T preamp features high quality Class A electronics, while the revolutionary DST transducer is a patented, high-tech electret film that acts like a condenser mic. Since the DST contact mic mounts discreetly on the inside of the drum shell near the head, its performance is consistent, since there are no mics to be accidentally bumped into and moved out of place. There are no positioning issues, and the changing room characteristics of different venues are taken out of the equation. The DST also offers superior isolation from overheads and snare, which is always a problem in the studio (was a problem), and especially for miked drums in live performance, where other instruments bleed into the onstage mics. The sleek looking and unobtrusive DM-T preamp will work with any size rack or floor tom. It attaches quickly and easily to the drum rim, while staying happily out of the way of errant drumsticks. Once attached, it need not be removed, which makes setup a breeze. The DST lead is simply fed through the drum air hole to the DM-T preamp. Once in place the DM-T connects via standard XLR cable to PA or mixer. The DM-T preamp can be powered by any 48-volt phantom powered PA or mixer, and has four mini switches for tone contouring: 1) +6 dB bass boost; 2) +12 dB boost at 330 Hz; 3) -8 dB cut at 500 Hz; 4) +8 dB boost at 4 kHz. In keeping with the B-Band philosophy, the DM-T does not add any noticeable weight to the drum, and is built to withstand rigorous touring. Of course, the most important question is: how does it sound? If it's any indication, the DM-T system employs the same technology found in B-Band's acoustic guitar systems, which are used by the likes of Larry Carlton and Steve Vai. Simply stated, live sound engineers find that they sound great and are a real time saver....details
B-Band A2.2 XOM Acoustic Guitar Preamp Narrow
The B-Band A2.2 with XOM is the future of acoustic guitar sound reproduction design. This dual input/mono output onboard preamp is set up for use with the acclaimed combination of UST and AST transducers. These, along with the convenient onboard remote XOM mix and volume controls-which mount just inside the edge of the soundhole without modification-bring the best of both transducers' characteristics together, resulting in a sound that is true to the guitar's unique voice.The entire A2.2 systems installs quickly and easily, only requiring two holes to be drilled-one under the saddle for the UST and one for the endpin output jack/strap button. For fast connection all components are plug-in-no soldering.The preamp mounts inside the guitar at the back and has input gain trims for both transducers that are adjustable with a screwdriver. The preamp is housed in lightweight all-metal box and is powered by a 9-volt battery. All mounting hardware, including a high quality endpin jack and hold-tight battery clip, are included. XOM-Cross Over Mix The B-Band research and development team has applied a crossover system to the exclusive patented pickup material. The Cross Over Mix (XOM) system combines the best aspects of each pickup into one complete source. By sensing the guitar from two separate locations and combining, what each pickup does best, the XOM system has a very complex and rich sound that further augments already superior sounding Emfit film pickups.The ideal process for authentic acoustic reproduction comes from combining the high frequencies of the AST and low frequencies of the UST, making a sound that is much more complete, true and pure. In addition, the XOM pan pot allows the player to select between full UST/AST XOM mix and the UST alone or one of the many points in between resulting in almost unlimited possibilities.You will find XOM to be an amazingly flexible sound manager resulting in an elegant transparent tone at any performance level....details
B-Band A3T Acoustic Guitar Sidemount Preamp Narrow
The A3T preamp for acoustic guitar retains the simple and small features that are big on sound and intuitiveness. It's compact and has a 4-band rotary EQ, low battery LED and a wide-range chromatic tuner. The EQ provides quick and accurate changes. The chromatic tuner is fast and has a range that will be welcomed by those who want to tune a full step down from standard-great for 12-string guitars too. The tuner shows all notes, including sharps, great for standard and open tunings. The guitar tuner has a single window showing the pitch and four LEDs showing the half step, sharp, flat, and in-tune. 9-volt-battery-powered....details
B-Band A3T Acoustic Guitar Sidemount Preamp Wide
The A3T preamp for acoustic guitar retains the simple and small features that are big on sound and intuitiveness. It's compact and has a 4-band rotary EQ, low battery LED and a wide-range chromatic tuner. The EQ provides quick and accurate changes. The chromatic tuner is fast and has a range that will be welcomed by those who want to tune a full step down from standard-great for 12-string guitars too. The tuner shows all notes, including sharps, great for standard and open tunings. The guitar tuner has a single window showing the pitch and four LEDs showing the half step, sharp, flat, and in-tune. 9-volt-battery-powered....details
B-Band A5T Acoustic Guitar Sidemount Preamp Narrow
The A5T preamp has a slider 4-band EQ, volume control, notch filter and frequency rotary controls, phase button, low battery LED and a full range chromatic tuner.The fully chromatic tuner has an LED strip that shows the note and individual LEDs showing the half step, sharp, flat, and in-tune. The guitar tuner is fast and responsive and will tune to a full step down from standard and is great for open tunings. 9-volt-battery-powered....details
B-Band A1.2 Acoustic Guitar Endpin Preamp Narrow
The A1.2 preamp is the little brother of the classic B-Band A2 and is big on classic B-Band sound. The single input A1.2 has a direct frequency response with 24 dB of gain, making a perfect fit with the B-Band UST (not included). The sound reproduction is amazingly pure and clear.The B-Band A1.2 comes with a volume control that simply mounts at the inside edge of the sound hole with adhesive. The 9-volt-battery-powered electronics are mounted in a small tube that is directly coupled with a high quality endpin jack, making an all-in-one structure.The guitar part is light in mass, adding very little weight to the instrument. Includes all mounting hardware, box-tight battery holder and wire harness....details
B-Band A1.2 Acoustic Guitar Endpin Preamp Wide
The A1.2 preamp is the little brother of the classic B-Band A2 and is big on classic B-Band sound. The single input A1.2 has a direct frequency response with 24 dB of gain, making a perfect fit with the B-Band UST (not included). The sound reproduction is amazingly pure and clear.The B-Band A1.2 comes with a volume control that simply mounts at the inside edge of the sound hole with adhesive. The 9-volt-battery-powered electronics are mounted in a small tube that is directly coupled with a high quality endpin jack, making an all-in-one structure.The guitar part is light in mass, adding very little weight to the instrument. Includes all mounting hardware, box-tight battery holder and wire harness....details
B-Band A1.2N Acoustic Guitar Endpin Preamp
This bundle includes a special version of the A1.2 that has a slight frequency notch of 6 decibels in the low-mids, giving the system a smooth acoustic sound at louder volume levels and is packaged along with, and for use only, with the 1470 AST. This gives you great tone at a great value. It can be used in any acoustic guitar, or similar instrument, that has good access to its interior.This preamp bundle comes with a volume control that simply mounts at the inside edge of the sound hole with adhesive. The 9-volt battery powered electronics are mounted in a small tube that is directly coupled with a high quality endpin jack making an all-in-one structure. As an option, the A1.2N can be phantom powered with the B-Band external battery box.The guitar part is light in mass adding very little weight to the instrument. Includes all mounting hardware, box-tight battery holder and wire harness....details
B-Band A5T Acoustic Guitar Sidemount Preamp Wide
The A5T preamp has a slider 4-band EQ, volume control, notch filter and frequency rotary controls, phase button, low battery LED and a full range chromatic tuner.The fully chromatic tuner has an LED strip that shows the note and individual LEDs showing the half step, sharp, flat, and in-tune. The guitar tuner is fast and responsive and will tune to a full step down from standard and is great for open tunings. 9-volt-battery-powered....details
B-Band A2.2 XOM Acoustic Guitar Preamp Wide
The B-Band A2.2 with XOM is the future of acoustic guitar sound reproduction design. This dual input/mono output onboard preamp is set up for use with the acclaimed combination of UST and AST transducers. These, along with the convenient onboard remote XOM mix and volume controls-which mount just inside the edge of the soundhole without modification-bring the best of both transducers' characteristics together, resulting in a sound that is true to the guitar's unique voice.The entire A2.2 systems installs quickly and easily, only requiring two holes to be drilled-one under the saddle for the UST and one for the endpin output jack/strap button. For fast connection all components are plug-in-no soldering.The preamp mounts inside the guitar at the back and has input gain trims for both transducers that are adjustable with a screwdriver. The preamp is housed in lightweight all-metal box and is powered by a 9-volt battery. All mounting hardware, including a high quality endpin jack and hold-tight battery clip, are included. XOM-Cross Over Mix The B-Band research and development team has applied a crossover system to the exclusive patented pickup material. The Cross Over Mix (XOM) system combines the best aspects of each pickup into one complete source. By sensing the guitar from two separate locations and combining, what each pickup does best, the XOM system has a very complex and rich sound that further augments already superior sounding Emfit film pickups.The ideal process for authentic acoustic reproduction comes from combining the high frequencies of the AST and low frequencies of the UST, making a sound that is much more complete, true and pure. In addition, the XOM pan pot allows the player to select between full UST/AST XOM mix and the UST alone or one of the many points in between resulting in almost unlimited possibilities.You will find XOM to be an amazingly flexible sound manager resulting in an elegant transparent tone at any performance level....details
B-Band UKKO-T Single Tom Drum Contact Mic
The B-Band UKKO-T single tom drum contact mic system is a remarkable way to capture the true tonality of your tom consistently, conveniently, and with extreme isolation. This system consists of two important components: the UKKO DMT preamp, built with high-quality class-A electronics, and the UKKO DST2 Contact mic for superb tone. This system will work with any size tom, and gives you high-resolution sound, and easy setup!This mic system was designed to be able to blend-in visually with the drum kit. That is why B-Band designed the DMT preamp to be chrome colored to match most drum hardware. It is an extremely lightweight system that does not add any noticeable weight to the drum, or get in the way while performing like most other drum mic systems. It also very robust and durable, and will endure rigorous touring.Setting up and tearing down have never been this easy. The DST2 has an adhesive back that mounts easily and discreetly on the inside of the drum shell near the batter head. The DST2 lead wire is fed through the drum air hole to the DMT preamp. The preamp comes with two different mounting options: mounting at the air hole outside of the drum, or a rim clamp mounting. The air hole mounting option was specially designed to not interrupt the flow of air as the drum breathes. Being as the DMT preamp is so small in size, there is no need to remove it to put the drum in its case, leave it on and be ready for the next gig or studio session. Inside the DMT preamp there are two mini switches that contour the sound for a choice of tone. One switch controls a -6dB mid cut at 1 kHz and the other is for a +6dB high boost at 5kHz....details
B-Band UKKO-S Single Snare Drum Contact Mic
The B-Band UKKO-S snare drum contact mic system is a remarkable way to capture the true tonality of your drum consistently, conveniently, and with extreme isolation. This system consists of two important components: the UKKO DMS preamp, built with high-quality class-A electronics, and the UKKO DST2 Contact mic for superb tone. This system will work with any size snare drum, and gives you high-resolution sound, and easy setup!This mic system was designed to be able to blend-in visually with the drum kit. That is why B-Band designed the DMS preamp to be chrome colored to match most drum hardware. It is an extremely lightweight system that does not add any noticeable weight to the drum, or get in the way while performing like most other drum mic systems. It also very robust and durable, and will endure rigorous touring.Setting up and tearing down have never been this easy. The DST2 has an adhesive back that mounts easily and discreetly on the inside of the drum shell near the batter head. The DST2 lead wire is fed through the drum air hole to the DMS preamp. The preamp comes with two different mounting options: mounting at the air hole outside of the drum, or a rim clamp mounting. The air hole mounting option was specially designed to not interrupt the flow of air as the drum breathes. Being as the DMS preamp is so small in size, there is no need to remove it to put the drum in its case, leave it on and be ready for the next gig or studio session. Inside the DMS preamp there are two mini switches that contour the sound for a choice of tone. One switch controls a +3dB mid boost at 500 Hz and the other is for a —6dB high cut....details
B-Band UKKO-KIT 5-piece Contact Drum Mic Set
The B-Band UKKO-KIT 5-Piece contact drum mic system is a remarkable way to capture the true tonality of your drums consistently, conveniently, and with extreme isolation. This system consists of two important components: UKKO DM preamps, built with high-quality class-A electronics, and UKKO DST Contact mics for superb tone. This system works with any size drums, and gives you high-resolution sound, and easy setup!This mic system was designed to be able to blend-in visually with your drum kit. That is why B-Band designed the DM preamps to be chrome colored to match most drum hardware. It is an extremely lightweight system that does not add any noticeable weight to the drum, or get in the way while performing like most other drum mic systems. It also very robust and durable, and will endure rigorous touring.Setting up and tearing down have never been this easy. The DST mics have an adhesive back that mounts easily and discreetly on the inside of the drum shell near the batter head. The DST lead wires are fed through the drum's air holes to the DM preamps. The DM preamps for the snare drum and toms come with two different mounting options: mounting at the air hole outside of the drum, or a rim clamp mounting. The air hole mounting option was specially designed to not interrupt the flow of air as the drum breathes. Being as the DM preamps are so small in size, there is no need to remove them to put the drums in their cases, leave them on and be ready for the next gig or studio session. Inside the DM preamps there are two mini switches, which contour the sound for choice of tone. The DMS, DMT, and the DMK preamps all have 2 different frequency choices from each other because snare drums, toms, and kick drums all have different tonal characteristics....details
B-Band UKKO-K Single Kick Drum Contact Mic
The B-Band UKKO-K kick drum contact mic system is a remarkable way to capture the true tonality of your kick drum consistently, conveniently, and with extreme isolation. This system consists of two important components: the UKKO DMK preamp, built with high-quality class-A electronics, and the UKKO DST1 Contact mic for superb tone. This system will work with any size kick drum, and gives you high-resolution sound, and easy setup!This mic system was designed to be able to blend-in visually with the drum kit. That is why B-Band designed the DMK preamp to be chrome colored to match most drum hardware. It is an extremely lightweight system that does not add any noticeable weight to the drum, or get in the way while performing like most other drum mic systems. It also very robust and durable, and will endure rigorous touring.Setting up and tearing down have never been this easy. The DST1 has an adhesive back that mounts easily and discreetly on the inside of the drum shell near the batter head. The DST1 lead wire is fed through the drum air hole to the DMK preamp. The preamp mounts in the air hole outside of the drum, and was specially designed to not interrupt the flow of air as the drum breathes. Being as the DMK preamp is so small in size, there is no need to remove it to put the drum in its case, leave it on and be ready for the next gig or studio session. To better capture the low frequencies of the kick drum there are two mini switches inside the DMK preamp that contour the sound for a choice of tone. One switch controls a -6dB mid cut at 330 Hz and the other is for a +6dB high boost at 5 kHz.If you have a hole cut on your resonant head or if there is no resonant head on your kick drum, this will make the UKKO-K sound thinner. It is recommended to have a solid resonant head for maximum tonal quality....details
|
