Godlyke Power-All System Reverse Polarity Jumper Cable
The Godlyke Reverse Polarity Jumper Cable (included in the PA-9 Power-All System, available separately) allows you to power effect units that have reverse polarity barrel connectors (tip positive/barrel negative). Can be hooked to any jack on the 5-Connector daisy chain or directly to the PA-9 itself. See recommended accessories for PA-9 Power-All System and 5-Connector Daisy Chain (which is included in the PA-9 system)....details

Godlyke Power-All Cable-11/R Right Angle Daisy Chain Cable
Designed for larger pedalboards, the Power-All Cable-11/R daisy chain cable features 11 right-angle male barrel plugs with spring-loaded jacks for extra secure connections so you don't have to worry about losing power mid-solo. The 28-gauge cable has an oil-resistant sheath and provides you with a 10" length between jacks to allow connection of larger and odd-sized effect pedals....details

Godlyke Power-All PA-9D 9V Digital Power Supply Deluxe Kit
The Godlyke Power-All PA-9D is a 2000mA, single-outlet power supply designed specifically for guitar effects users. Don't waste money on batteries or take up valuable space with multiple wall wart adaptors or power bricks. The Power-All system can power your entire pedalboard from a single outlet, and the power cable's 10' length allows you some freedom to play in the center of your room.This Deluxe Power Supply Kit can power 11 guitar pedals out of the box. It provides 9 volts DC at 2000 milliamps, which is more than enough current to power dozens of effect pedals, including up to 4 Line 6 modelers. The Power-All Deluxe Kit comes complete with a variety of jumper cables that allow connection of phone plug, reverse polarity, digital, and battery-only pedal types. The cables come in an assortment of lengths and include straight and right-angle plugs. The kit includes the C-11/R which features 11 right-angle connectors for daisy chaining with spring-loaded jacks for extra secure connections so you won't lose power mid-solo. You also get 5 cable cap insulator sheaths to cover power leads that are not in use.The Power-All's special circuit design produces extremely low noise. The ferrite-core filter on the power output cable aids in reducing hum and noise too. The power cable also automatically converts any input voltage to 9 VDC, allowing the Power-All power supply to be used anywhere around the world. Built to stand the rigors of the road, it features professional-grade construction and comes with a lifetime warranty....details

Godlyke Power-All Cable Green Right Angle Jumper
The Power-All Cable-Green Right Angle jumper is included in the Power-All system and also sold separately. With this Godlyke right angle jumper you can power Line-6 Stomp-Box modelers and other digital effect units from the PA-9. The Cable-Green features a reverse-polarity (tip positive), right-angle male barrel connector with a larger, 2.5 mm internal diameter and spring loaded clips. The Cable-Green/R can be used with Line-6 Modelers, Electro-Harmonix units, and other pedals requiring a larger diameter jack. the Cable-Green/R can be connected to any jack on the Cable-5 Daisy Chain, the Cable-Y splitter or directly to the PA-9 itself (note that the PA-9 can power up to three Line-6 Modelers while still having power remaining for other effect units). Cable Length is 145 mm from jack to jack...details

Godlyke 5-Connector Daisy Chain
Expand the capabilities of the Switchmode power supply and drive five additional pedals. Connects easily to the original daisy-chain connector....details

Godlyke Power-All Cable-Red/R Right-Angle Reverse Polarity Cable
The Power-All Cable-Red/R Right-Angle Reverse Polarity Cable is included in the Godlyke Power-All System and is also available separately. The Cable-Red/R allows you to power effect units that have reverse polarity barrel connectors (tip positive/barrel negative). The Cable-Red/R features a tip positive, male barrel connector that is spring-loaded to prevent disconnection. The Cable-Red/R is 165 mm in length from jack to jack. The Cable-Red/R can be hooked to any jack on the Cable-5 daisy chain, the Cable-Y splitter, or directly to the PA-9 itself....details

Godlyke Power-All Cable-Y Y-Splitter Extension Cable
The Power-All Cable-Y from Godlyke is a Y-splitter cable with 5.5 mm standard polarity tip negative/barrel positive male spring-loaded jacks. The cable-Y allows you to power two effects pedals off of one PA-9 or one lead of the Cable-5 Daisy Chain. Allows for chaining of additional effects without the need for a second daisy-chain cable. (Actual number of units capabale of being powered will depend on current draw of individual units used).Jacks (spring-loaded x 2): 5.5 mm external diameter, 2.1 mm internal diameter, 10 mm barrel length.Cable length: 155 mm (to split), 268 mm total....details

Godlyke Power-All Cable-Black/R Right-Angle Extension Cable
Included in the Power-All System and also sold separately, the Godlyke Cable-Black/R allows you to power over-sized effect units (or units with AC jacks in hard-to-reach places) off of the Power-All Daisy Chain. The Cable-Black features a tip-negative, male barrel connector with spring-loaded jack. The Cable-Black/R is 270 mm long from jack to jack and can be connected to any jack on the Cable-5 Daisy Chain, the Cable-Y splitter, or directly to the PA-9 itself....details

Godlyke Power-All Cable-Blue/R Right-Angle Phone Plug Cable
Included in the Power-All System and also sold separately, the Cable-Blue/R features a right-angle jack that allows users to power effect units that use a 1/8" phone plug connector with tip-positive polarity. The Cable-Blue/R can be connected to any male jack on the Cable-5 Daisy Chain, Cable-Y Splitter or directly to the PA-9 itself. Note that to achieve tip-negative polarity from the Cable-Blue/R, simply attach a Cable-Red in between it and the power source.Cable Length: 126 MM between jacks...details

Godlyke Power-All PA-9B 9V Digital Power Supply Basic Kit
The Godlyke Power-All PA-9B is a 2000mA, single-outlet power supply designed specifically for guitar effects users. Don't waste money on batteries or take up valuable space with multiple "wall wart" adaptors or power bricks—the Power-All system can power your entire pedalboard from a single outlet.The Power-All Basic Kit can power five guitar pedals out of the box. It provides 9 volts DC at 2000 milliamps, which is more than enough current to power dozens of effect pedals, including up to 3 Line 6 modelers. The Power-All Basic Kit comes complete with a variety of jumper cables that allow connection of phone plug, reverse polarity, digital, and battery-only pedal types. The Power-All's special circuit design produces extremely low noise. A ferrite-core filter on the power output cable aids in reduction of noise and hum too. The power cable also automatically converts any input voltage to 9 VDC, allowing the Power-All power supply to be used anywhere around the world. Built to stand the rigors of the road, it features professional-grade construction and comes with a lifetime warranty.Please note: a misprint on this product's packaging gives a power rating of 1700mA. The correct specification is 2000mA....details

Godlyke Power-All System C-5/R 5-Connector Right Angle Daisy Chain Cable Black
You can connect this cable from Godlyke to 5 different effects pedals. Features right angle daisy chained connectors with standard polarity tip negative and barrel positive jacks. Link multiple C-5/R cables to power over 20 9-volt effects pedals. Cable is 55" (1397mm) long total; 10.5" (270mm) long between jacks.The male jacks are spring-loaded to prevent accidental disconnection from the power source or pedal....details

Godlyke Power-All System Extension Jumper Cable
This Godlyke jumper cable allows you to power oversized effect units or units with AC jacks in hard-to-reach places. 8-1/4" long from jack to jack and can be connected to any jack on the 5-Connector Daisy Chain (included in Power-All System) or directly to the PA-9 itself. (see recommended accessories on this page)...details

Godlyke Power-All System Phone Plug Jumper Cable
The Godlyke Phone Plug Jumper Cable allows you to power effect units that employ a 1/8" phone plug connector with tip-positive polarity. It can be connected to any jack on the 5-Connector Daisy Chain or directly to the PA-9 itself. Note that to achieve tip-negative polarity from the Phone Plug Jumper Cable, simply attach a Reverse Polarity Jumper Cable between it and the power source. See recommended accessories for PA-9 Power-All System and 5-Connector Daisy Chain (which is included in the PA-9 system) and Reverse Polarity Jumper Cable....details

Godlyke Power-All System Line 6 Jumper Cable
The Godlyke Line 6 Jumper Cable allows you to power Line 6 stompbox modelers from the PA-9 (sold separately). Features reverse-polarity barrel connector with a smaller internal diameter designed specifically for use with Line 6 Modelers. Connects to any jack on the 5-Connector Daisy Chain or directly to the PA-9 itself. Note that the PA-9 can power up to 3 Line 6 modelers while still having power remaining for other effect units. See recommended accessories for PA-9 Power-All System and 5-Connector Daisy Chain (which is included in the PA-9 system)...details

Godlyke Power-All System Battery Clip Jumper Cable
The Godlyke Battery Clip Jumper Cable allows you to use the PA-9 Power-All System (sold separately) to power vintage and boutique effect units that do not have an external AC power jack. Hooks directly to the unit's battery clip and can be connected to any jack on the 5-Connector Daisy Chain or directly to the PA-9 itself. See recommended accessories for PA-9 Power-All System and 5-Connector Daisy Chain (which is included in the PA-9 system)....details

Godlyke Power-All UTA-1 Universal Travel Adapter
The Godlyke UTA-1 is a universal travel power adapter that allows you to safely connect your electrical devices to any outlet type worldwide. The UTA-1's modular design features a base socket that accepts input from any plug type. The base unit can be fitted with any of the 9 interchangeable plug inserts included in the kit. The UTA-1 is perfect for the busy traveler who needs to conserve space and comes complete with a zippered nylon storage case....details

Godlyke PA-9S-US Power-All 9V Digital Power Supply
The Godlyke PA-9S-US Power-All is a 2000mA, single outlet power supply designed specifically for guitar effect users. Instead of wasting money on batteries or taking up valuable space with multiple wall-wart adapters or power bricks, just one Power-All system can power your entire pedalboard from a single power supply that takes up only one outlet. This convenient power supply replaces the Boss PSA-120, DOD PS-200R, Morley 9V, DanElectro DA-1, Dunlop ECB-003, Ibanez AC-109, Guyatone AC-2, Maxon AC210N, Zoom AD-0006 and just about any other 9 VDC power adaptors.The Power-All provides 9 volts DC at 2000 milliamps—more than enough current to power dozens of effect pedals, including up to 4 Line 6 Modelers. The PA-9S features a 10-foot, 18-gauge cable that allows for longer power runs without the need for an extension cord. Thanks to a special circuit design and a ferrite-core filter built onto its output cable, the PA-9S power supply offers an incredible low noise floor, and reduced hum. The unit also automatically converts any input voltage to 9 VDC, allowing it to be used anywhere around the world.Built to stand the rigors of the road, the Godlyke Power-All features professional-grade construction and comes with a lifetime warranty....details

Godlyke IP-1 Iso-Pump Voltage Converter
The IP-1 Iso-Pump voltage converter from Godlyke is for those oddball effect pedals that don't run off the standard 9 volts. Designed to work specifically with the PA-9 Power-All digital power supply, the Iso-Pump takes 9 VDC and converts it to 12, 18, or 24 VDC, selectable via an external switch. Though the Iso-Pump pedals require 2 batteries, pedals with internal vacuum tubes, and many digital units can be powered directly off the PA-9 Converter without the need for a separate power supply. The IP-1 can also be used to get more headroom out of certain overdrives. Best of all, the IP-1 features Godlyke's proprietary "Ground Hound" ground isolation technology which allows use of guitar pedals with opposing ground configurations to be powered off the same series power supply....details

Godlyke GH-1 Ground Hound Ground Isolator
Using Godlyke's proprietary technology, the GH-1 Ground Hound ground isolator creates an isolated ground connection for any effect unit that is powered off the PA-9 Power-All digital power supply. Avoid ground loops, reduce line noise, and finally be able to power pedals with opposing ground configurations off the same series power supply. The Ground Hound allows Fuzz Face and ToneBender-style fuzzes and other positive-ground pedals to work in conjunction with standard negative-ground guitar pedals off the same power supply. The GH-1 can also reduce noise from certain digital units with multiple ground planes....details