Grace Design M801 8-Channel Studio Preamp
The Grace Design model m801 8-Channel Studio Preamp delivers unmatched audio performance — with massive headroom and ultra-wide bandwidth which contribute to a markedly open, musical character. The m801 is designed to effortlessly resolve even the lowest level ambient information, resulting in a sonic picture of astonishing clarity and detail, which serves to capture the essential character of the music being recorded.The m801's signal path has been hot-rodded to be fully balanced from start to finish, resulting in wider dynamic range, while new higher current output drivers enable even longer cable runs without signal loss. Included on each channel is a dedicated ribbon microphone switch, which shifts the preamplifier's entire gain range up 10dB while deactivating 48V phantom power and bypassing the decoupling capacitors. And we've added an additional set of 8 channel balanced outputs for sending signals to a secondary recorder, workstation or console.While its predecessor now takes its place in pro audio history, the new m801 faithfully furthers the tradition of breathtaking audio performance and perfect reliability in a beautiful and functional 8 channel package....details

Grace Design m201 Microphone Preamp
The Grace Design m201 Microphone Preamp delivers unmatched audio performance, with massive headroom, ultra-wide bandwidth and a very open, musical character. The signal path has been hot-rodded to be fully balanced from start to finish, resulting in a wider dynamic range, while high-current output drivers enable even longer cable runs without signal loss. The rackmountable m201 mic preamp translates a sonic picture of astonishing clarity and detail, which serves to capture the essential character of the music being recorded.A ribbon mic mode is now included, which shifts the gain range up 10dB while deactivating 48V phantom power, bypassing the decoupling capacitors and optimizing the input impedance. Each channel has an 'input mode' rotary switch which selects between a standard 48V phantom input, ribbon mic mode, a front panel DI input or optional DPA high voltage inputs (130V or 190V). Included is a M + S (mid side) decoder circuitry with a built-in width control. The front panel width control is wired with a precision 12 position rotary switch which provides a range from 100% mid (mono) to 30% mid / 70% side. The ultra-precision summing and difference amplifiers feed a set of dedicated outputs, which allows simultaneous recording of discrete mid and side signals as well as the stereo matrix.The front panel mounted HI-Z inputs are designed to accommodate a wide variety of high impedance input sources, making the m201 preamplifier an excellent choice as a DI box which will flawlessly preserve the sound of any plugged-in instrument. Imagine the same resolution and detail as Grace Design microphone preamplifiers available for DI recording situations. Additionally, Grace Design will be offering the m201 with a state-of-the-art 24-bit/192kHz A/D converter option (retrofitable), rounding the m201 off as the ultimate transparent input solution for any recording facility.(Sold separately)...details

Grace Design m906 5.1 Monitor Controller
Versatile, sonically invisible monitor system that enables you to hear and manipulate the finest detail. Features the same high-resolution as the acclaimed GD mic preamps, with balanced and unbalanced analog 5.1 inputs, multiple balanced stereo analog inputs, plus digital 5.1 and stereo inputs.As of 5/27/05, new software updates with a host of new features are available from Grace Design website for the m906. Downloading these requires a special cable which, if you do not have, is available free of charge from Grace Design by contacting their Boulder office. If you do not have internet access, the downloads will be provided to you on CD, also free of charge....details

Grace Design m904 Stereo Monitor Controller
Combines multiple balanced and unbalanced analog and digital inputs with precision level controls for two pairs of studio monitors and dual headphone outs. As of 5/27/05, new software updates with a host of new features are available from Grace Design website for the m904. Downloading these requires a special cable which, if you do not have, is available free of charge from Grace Design by contacting their Boulder office. If you do not have internet access, the downloads will be provided to you on CD, also free of charge....details

Grace Design Lunatec V3 2 Channel Mic Preamp (6V)
This 6V version of the Lunatec V3 is based on the industry standard Lunatec V2. Designed to deliver accurate, musical preamplification with high-definition A/D conversion in a bombproof, portable, DC-powered package. Sound designers, remote engineers, classical engineers, concert tapers, or anyone with a portable recording system will be stunned by the depth, clarity, and realism the Lunatec V3 delivers.Grace Design's ultralow distortion, 24-bit A/D converter is included as standard. Flexible outputs include S/PDIF (RCA) and 2 sets of AES3 (XLR). Sample rates of 44.1, 48, 88.2, 96, 176.4, and 192kHz are supported. Both single- and dual-wire 176.4 and 192kHz AES/EBU modes are provided via a pair of XLR connectors. Also includes an analog noise-shaping dither circuit (ANSR)....details

Grace Design LunaTec V3 AC Adapter (6V)
Power adaptor for the Grace Design LunaTec V3....details

Grace Design LunaTec V3 Power Cable (12V) 3 Foot
12V power cable for the Grace Design LunaTec V3....details

Grace Design Model 801TC 10dB Output Trim Control
The 801TC option provides model 801 users with 10dB of continuously variable trim in addition to the standard rotary gain switch. This is provided as a concentric pot that's integrated with the gain switch on any given model 801 channel....details

Grace Design Lunatec V3 2 Channel Mic Preamp (12V)
This 12V version of the Lunatec V3 from Grace Designis based on the industry standard Lunatec V2. Designed to deliver accurate, musical preamplification with high-definition A/D conversion in a bombproof, portable, DC-powered package. Sound designers, remote engineers, classical engineers, concert tapers, or anyone with a portable recording system will be stunned by the depth, clarity, and realism the Lunatec V3 delivers.Featuring Grace Design's ultralow distortion, 24-bit A/D converter. Flexible outputs include S/PDIF (RCA) and 2 sets of AES3 (XLR). Sample rates of 44.1, 48, 88.2, 96, 176.4, and 192kHz are supported. Both single- and dual-wire 176.4 and 192kHz AES/EBU modes are provided via a pair of XLR connectors. Also includes an analog noise-shaping dither circuit (ANSR)....details

Grace Design M101 Microphone Preamp
In 2000, the Grace Design model 101 microphone preamp helped fuel a revolution. When people took professional recording into their own hands, it was there with all of the quality and performance of a high-end mic preamplifier, but with a price that made it available to the masses. Eight years later, and the cause moves forward with the newly redesigned m101 preamp.Maintaining Grace Design pedigree throughout, the m101 employs balanced, transformerless, transimpedance circuit topology. With incredible bandwidth and headroom, the m101 is natural, musical and detailed, allowing engineers and musicians to consistently record vibrant, amazing tracks.The m101 is equipped with a redesigned universal switching power supply that's dead quiet and accepts input voltages from 100 to 240V AC. The front panel is a tough black anodized/laser etched black, which ensures legibility and usability in varying light conditions. And all preamp functions have a dedicated indicator LED, including the 48V phantom power and HPF switch.Built in as standard is Grace's unique Ribbon Mic Mode, which bypasses the input decoupling capacitors, raises the input impedance from 8.1kω to 20kω, and defeats the 48V phantom power, preventing damage to delicate ribbon mic elements. Ribbon mics, you're welcome.The gain range is 10-75dB, including the additional +10dB of gain available with the output trim control. This provides ample gain for use of any type of microphone in any recording situation. The gain control is a precision gold-plated, 12-position switch, and the circuit path is built with 0.5% metal film resistors.Included is a HI-Z input on the front panel. Rear panel I/O options include both balanced TRS and unbalanced TS 1/4" outputs, along with the standard XLR balanced out and XLR microphone in.Equally at home amplifying a vintage condenser mic or a plugged-in acoustic guitar, the m101 delivers the kind of high fidelity performance previously available only to big budget recording studios and Grammy winning musicians. Add it all up while considering that the price is unmatched and the picture becomes pretty clear — the m101 is one little hot rod piece of pro audio gear for everyone from home recording enthusiast to top professional.Note: For a truly outstanding sound and value, we suggest using the Grace m1011 with the CAD e300 condenser mic (see (#271261) for amazingly clear and detailed, yet warm-sounding vocals....details

Grace Design m501 500 Series Microphone Preamp
The m501 is Grace Designs 500 series module version of the venerable m101 mic preamplifier. Now the signature transparency and detail of Grace circuit designs is available for your 500 series frame.While the 500 series market has plenty of colored mic preamplifier options, the natural, musical clarity of the m501 makes it a welcome addition to the field. This circuit is for audio engineers who are confident with the quality of the source, mic section and placement, and wish to capture it with as little coloration or distortion as possible.The m501 module is a balanced, transformerless preamplifier, with 48V phantom power, a 75Hz HPF and a 1/4" HI-Z instrument input. Also standard is Grace Design's exclusive ribbon mic mode, which raises the mic input impedance, bypasses the input decoupling capacitors and deactivates 48V phantom power to protect delicate ribbon mics from damage.Large diaphragm, vintage ribbon or trusty dynamic—the Grace Design m501 brings out the very best in any microphone and takes the guesswork out of your input chain....details

Grace Design m103 Channel Strip
The Grace Design m103 Channel Strip is equipped with tried-and-true m101 transformerless microphone preamplifier circuitry. Headroom, detail, clarity, musicality—its all here complete with Grace's exclusive ribbon mic mode, a 75Hz HPF, and 48V phantom.The m103 channel strip's 3-band EQ section is built around single-stage parallel tuning architecture, which minimizes circuitry and delivers natural, musical tonal shaping at all frequencies. A fully parametric mid has shelving and peak modes on the high and low bands.The compressor circuit is based on an optical attenuator—the purest, high fidelity gain control mechanism available. It provides gentle limiting to fairly heavy compression, while remaining neutral and transparent. The perfect way to zip it all up and send it downstream—clean, intact and alive.Comprehensive I/O options permit the mic pre and EQ/COMP sections to be accessed independently of each other, and the order of the EQ/COMP is switchable. The m103 compressor controls can be linked for stereo applications, and 10 segment gain reduction. Output meters make monitoring signal status simple....details