Lehle 3at1 SGoS Switcher Guitar Pedal
The Lehle 3at1 SGoS guitar pedal permits stereo switching via gold-plated relays between up to 3 different instruments. The signal is routed without any loss from Inputs A B or C to Outputs 1 and 2, enabling you to switch easily between amp and tuner.The Lehle 3at1 SGoS can be controlled and synchronized with other Lehle SGoS Switchers via MIDI....details

Lehle Sunday Driver Guitar Preamp
The Lehle Sunday Driver is a high-end preamp with a convenient compact format. It features JFET-based circuitry and provides 2 modes of operation, with selection via a mode selector switch with gold-plated contacts: "D" stands for Driver; in this mode, the guitar signal is amplified, with absolutely no modification, at the input impedance of a guitar amp, efficiently eliminating losses on the route through leads and effects; the signal remains strong and clear, retaining its full dynamics. The second setting "S" - as in Sunday - multiplies input impedance by 4, bringing out previously inaudible details and, as gain increases, imparting to the guitar sound a characteristic and unmistakable warmth that has given this preamp its name - the result is a sound as mellow as a sunny Sunday afternoon! Even at a 15dB gain setting, the Lehle Sunday Driver always stays clean and absolutely free of background noise, thanks to its studio-standard signal-to-noise ratio of over -100 dB. To exploit the dynamics of tube amplifiers to the full, the input voltage is also rectified from the power supply socket, then filtered, stabilized and doubled to 18V. With its broad output range of 20 to 100,000Hz, the Lehle Sunday Driver, powered by a standard 9V (PP3) battery, can be used anywhere, whether as a cable driver for stadium and other large stages, in complex effects set ups, or as a recording preamp - and not just Sundays!...details

Lehle Little Lehle True Bypass Effects Loop Switcher Guitar Pedal
The Little Lehle is a genuine True-Bypass Looper / Switcher pedal. It can be used to manage an effect-loop or as a simple A/B box. Two instruments can be optionally routed to one amplifier input, or one instrument switched back and forth between two amplifiers. The gold-plated-contact switcher contained in the unit switches with maximum signal fidelity. The separate switching level for the ground contacts makes ground loops impossible. The Little Lehle offers full stereo functionality, with all jacks and internal switching contacts executed in stereo.1 - Input signal The input signal enters via this socket. Like all the jacks on the Little Lehle, the jack is of stereo type. The Little Lehle thus switches stereo signals (such as stereo effects or keyboards) and symmetrical signals (like those from microphones, for instance) and, of course, simple mono signals, like that of an electric guitar.The LED (6) shows green when the signal is present on the output (4) together with the ground (earth) connection. Press the trigger (7) and the stereo signal and ground connection are routed to the S jack (2). The LED (6) will now show red. Switching of the ground connections eliminates the possibility of hum loops.2 - Send The "S" stands for "Send". Depending on the mode selected, this jack is either connected to the input or inputs of one or more effect units, to a second amplifier or, for example, to a tuner.3 - Return "R" stands for "Return". This jack can be used for connection to the output of the effect unit(s) or, for example, can also be used for connection of a second instrument. It has no function if the Little Lehle pedal is used as an A/B box for operation with two amplifiers.4 - Output The output signal is routed out of the Little Lehle via this socket. The LED (6) shows green when the input signal together with the ground connection is directly present here. Pressing the trigger (7) routes the R(eturn) jack signal (3) together with the ground connection to the output jack.5 - Power supply The Little Lehle guitar pedal requires an 8 to 20V power supply for operation of the LEDs. Polarity is of no importance. The supply voltage is internally rectified and stabilized in order to guarantee trouble-free operation. A thermal cut-out automatically trips and switches the unit off if a short-circuit occurs. A correctly fitting plug connector for the power-supply socket is supplied with the Little Lehle. This can be soldered to the required power unit if necessary.6 - LEDs behind a magnifying lens The high-intensity LEDs, which are located under a light guide system with an optical lens, clearly indicate the current switching state - even under bright spotlights.7 - Indestructible switching mechanism Two parallel slide switches with gold-plated contacts, which switch the stereo signal together with the ground connections, are actuated inside the switcher by means of a practically indestructible switching mechanism....details

Lehle P-Split Splitter Guitar Pedal
P-Split stands for "passive splitting" with maximum signal fidelity. With the Lehle guitar pedal, one instrument can be routed to two amplifiers simultaneously. Output A is electrically isolated from Output B by the Lehle LTHZ high end transformer — so ground loops are excluded from the start. In addition, the Lehle P-Split also features a gold-plated-contact phase-reversing and ground switch.Lehle LTHZ The Lehle LTHZ is a ferrite core transformer consisting of two coils with very high inductivity with minimal scatter. It is ideal for the galvanic isolation of high-impedance signals.1 The input signal should be fed into this jack. The Lehle P-Split operates purely passively. The input signal remains continuously connected to outputs A and B with no semiconductors or any other active component in the signal path. 2 The input signal and its ground are directly present on jack B. 3 This switch can be used to rotate the phase of the input signal on output A through 180°. Shifting the phase may help if phase cancellations have a negative effect on signal reproduction. 4 Pressing this switch connects the grounds of outputs A and B. 5 The input signal is present on jack A, electrically isolated by the Lehle LTHZ (7) high-end transformer.6 The base of the Lehle P-Split can be secured without difficulty. First remove the four housing screws for the cover, and then screw the base of the switch to a base-plate using the two screws supplied with the unit, the washers and the spacer elements. 7 The Lehle LTHZ is a ferrite core transformer consisting of two coils with very high inductivity with minimal scatter. It is ideal for the galvanic isolation of high-impedance signals....details

Lehle Dual SGoS Amp Switcher Guitar Pedal
The Lehle Dual SGoS pedal routes the signal via gold-plated relays to outputs A, B or T. Outputs A and B can feed two different amps simultaneously since the signal paths are electrically isolated by the Lehle LTHZ high-end transformer — completely eliminating humming loops. In this case, the potentiometers enable you to lower the output signal for A and B separately. Output T can be used for a tuner or a third amplifier. Both inputs can be routed in stereo to Outputs A and B. In addition, the Lehle Dual SGoS also incorporates gold-plated phase-reverse and ground switches.The Lehle Dual SGoS pedal can be controlled and synchronized with other Lehle SGoS Switchers via MIDI....details

Lehle Little Dual Amp Switcher Guitar Pedal
The Lehle Little Dual amp switcher pedal routes your signal via gold-plated relays to Outputs A or B. Outputs A and B can feed 2 different amps simultaneously, since the signal paths are electrically isolated by the Lehle LTHZ high end transformer — completely eliminating hum loops. Both inputs can be routed in stereo to Outputs A and B. In addition, the Little Dual guitar pedal also incorporates gold-plated phase-reverse and ground lift switches....details

Lehle 1at3 SGoS Switcher Guitar Pedal
The Lehle 1at3 SGoS guitar pedal is a genuine True-Bypass Switcher that routes the incoming signal from a single source to up to 3 outputs (e.g. amps, tuner, effects). Output B and the C->B jack can be used as a loop, enabling you to switch instantly between the unaffected signal and the signal with effects.The Lehle 1at3 SGoS can be controlled and synchronized with other Lehle SGoS Switchers via MIDI....details

Lehle D.Loop SGoS 2 Channel Guitar Effects Loop Pedal
The Lehle D.Loop SGoS is a fully programmable Effect Looper/ Switcher with two separate true-bypass loops routed via gold-plated relays. It includes a switchable high-end buffer amp with adjustable gain up to +12 dB. Loops and buffer amp are both all-stereo.The Lehle D.Loop SGoS can be controlled and synchronized with other Lehle SGoS Switchers via MIDI....details