Pedal Pad AXS II Guitar Effects Pedalboard Charcoal
The low-profile Pedal Pad AXS II Pedalboard is road-tough with its metal corners and heavy-duty latches—this pedalboard's built for maximum durability. Its enclosed cabinet, made of 9-ply Baltic birch, is fabric-covered inside and out. Pedals and settings are protected during storage and transport. Its pitched pedal surface on top features a cable-concealing compartment that's hinged for easy access....details

Pedal Pad Patch Pad Guitar Effects Pedalboard Patch Bay Black
The Patch Pad Stereo Routing Module from Pedal Pad makes leaving your guitar effects pedals permanently plugged in easy, thus creating fast, hassle-free set-ups. The Patch Pad also has options for running external rack effects and 2-amp stereo set-ups. Conveniently run a separate pedal chain through your amplifier's effects loop by using the second channel of the Patch Pad. Use the Patch Pad's auxiliary balanced signal loop to route your amplifier's channel switching and reverb.The switching jacks in the Patch Pad can configure just about any mono or stereo combination imaginable. All of the connections in the Patch Pad are wired point to point. Even if you do not plan on using stereo routing or utilizing the Patch Pad stereo routing I/Os endless combination of routing capabilities, you can still use this Pedal Pad just to protect your valuable effects pedals from wearing out. No more constantly plugging and unplugging the last pedal in your pedal chain and risking the loss of your effects settings from handling your pedals. On the road or in the studio you will find lots more uses for the Patch Pad.Balanced Loop Feature: The balanced loop is nothing more than 2 stereo jack sockets hardwired together. Its intended use is for channel switching footswitches for your amp. As an example, say you have a Vibrato/Reverb footswitch for a Fender Vibroverb mounted on your board which uses a TRS (stereo) cable. This goes into one side of the balanced loop. You can then leave it connected just like any other pedal on the board. During setup you would then run a stereo cable from the other jack in the balanced loop to the back of the amp. The important part of the balanced loop is that it does not share a ground wire with the other jack sockets on the Patch Pad. Many amp footswitches have LED indicators which use the signal wire to power the LED and that makes for a noisy pedal board if you share a ground with the audio patch bay. There are other potential uses for the Patch Pedal—just add your imagination....details

Pedal Pad AXS-XL Guitar Effects Pedalboard Charcoal
The Pedal Pad AXS-XL Pedalboard gives players ultimate versatility at a lower price. This model features a concealed cable routing compartment and a pitched and hinged pedal surface. All Pedal Pad Pedalboards have a rugged, lightweight design that protects your effects pedals during transport and enables easier transport....details

Pedal Pad AXS Road Buddy Pedalboard
With the Pedal Pad AXS Road Buddy Pedal Board - there is no more untangling cables, plugging into the wrong input/output jacks, losing your control settings, "toe pointing" or risking shorts and wearing out your effects pedals. Connect everything just once, hiding all the cables you used to trip over under the pitched and hinged pedal surface for a clean and professional workspace. When you're ready to play, just plug in your guitar and start rockin'.The ramped and hinged, carpeted pedal surface makes it easy to attach a pedal anywhere on the board. Simply attach the top hook side of the Velcro to the bottom of your pedal and let it grip. This model also features a concealed cable routing compartment and a pitched and hinged pedal surface. Pedal Pad AXS Road Buddy Pedal Board has a rugged, lightweight design that protects your effects pedals during transport while making carrying easier....details

Pedal Pad MPS II Tour Series Pedalboard
The low-profile MPS II Tour Series Pedalboard System gives you flexibility with guitar pedal setup and road-tough construction. At the heart of Pedal Pad's MPS design is the patented 2-tier system, adjustable from a stair-step to a single plane, which can accommodate longer pedals. Enclosed cabinet with heavy-duty latches and corners protects pedals, maintains settings, and makes transport easy. The pedalboard comes with the Power Pad power supply with 8 - 9-volt DC outputs and one 110V AC output....details

Pedal Pad MPS XL II Tour Series Powered Pedalboard
The low-profile Pedal Pad MPS XL II Tour Series Powered Pedalboard holds up to 16 effects pedals. It is road-rugged and features a 2-tier stair-step modular design with the ability to raise and lower panels to accommodate larger guitar pedals such as wah and volume. Includes Peddle Pad's Power Pad conditioned power supply with 8 regulated 9V DC outputs and a 120V AC outlet. Includes 8 - 24" DC cables, a 10' IEC AC cord, and 4' of mating hook-and-loop fastener material....details