Sabra SSM-POP Pop Filter and Shock Mount Kit for Microphones
The modular SSM-POP Shock Mount and Pop Filter microphone system from SABRA SOM will safely and firmly position, larger and heavier microphones. The SSM-POP combines the SSM-1 universal noise suppressing elastic microphone support with a high precision, 5" diameter, double face SPF pop filter at a surprising low cost.SSM-1 Pop Filter A replacement shock mount that works like the very best studio versions, the Sabra-Som SSM-1 is inexpensive and works with any mic! We have tried lots of solutions, and the SSM-1 decouples mics from "thumps" better than just about anything else we know of, regardless of price. This clever little design uses powerful elastics on two rings that can be moved closer or farther apart along a hexagonal metal bar. The SSM 1 fits any diameter microphone up to 2.5 inches. You can mount anything in the Sabra-Som SSM1 from a multi-pound large diaphragm tube mic to a lavalier mic. If you lost your old shock mount, must solve "thumping" on the desk, floor or podium, this is the one! Amazingly sturdy, it should last you a lifetime.SSM-POP Pop Filter The mounting of pop filters is often the biggest challenge for goosenecks are noisy and lose their stiffness, and other systems do not allow for varying distances or positions. The Sabra-Som crew has solved this problem with the Pop Filter Kit. The kit contains a dual membrane (replaceable) pop filter that mounts to the Sabra-Som Hex Bar. Two Hex Bars and Sabra-Som Articulated Hex Connectors are used to enable you to go "up and over" the mic for positive Pop Filter positioning and maximum clearance under the mic when singers/broadcasters must read. The SSM-POP, is designed to be used vertically and will accommodate larger and heavier microphones. It adjusts easily and locks firmly into place, allowing for conventional or inverted configurations. By eliminating both vibrational thuds and breath pops it conserves the high performance of the microphone being used. The significant firmness of the SSM-POP is due to the elastic suspension rings being attached to the 200 mm bar and to the pop filter's 150 mm bar, creating a compact structure with the necessary flexibility to attach the pop-filter.The Sabra Som SSM-POP consists of the following items:•1 articulated arm, formed by a 200 mm hexagonal aluminum bar and a 150 mm hexagonal aluminum bar •2 elastic suspension rings •1 central elbow with ratcheted central axis, with a 5/8" universal female thread at its base, attachable to any conventional microphone stand •1 5" diameter double-face pop filterAbout Sabra-Som In our never-ending quest to bring you the best and most useful musical products and accessories, every once and again we come across pure gold. One such discovery is Sabra-Som, is a Brazilian company that makes a line of unique and exceptionally clever modular and adaptive mic stand accessories. Based around a hex-rod design, each piece can be custom fit for any...details

Sabra SSM-1 Universal Shock Mount for Microphones
Studio engineers have long known the necessity for good shock mounts in getting the real sound of any mic, but the prices of some studio-quality systems are pretty outrageous. With the Sabra-Som SSM-1, small project studios can now have the same quality shock mounts as the large studios for every mic in the cabinet and at a fraction of the cost! Sabra-Som SSM-1 Universal Shock Mount, First Take: Improves sound quality dramatically by isolating mic from stand Fits any diameter mic up to 2" Adjusts to compensate for mic's center of gravity, form heavy tube mic to lavalier micShock Mount Isolation Improves Sound Quality DramaticallyWhen a microphone picks up an audio signal, it also picks-up unwanted mechanical noise through the microphone stand. This is caused by vibrations in the vicinity such as the kick drum, low frequencies from amplifiers, an artist's movements, etc., etc. It's common for people to seek an electronic solution to this problem, such as use of a noise gate, re-equalization (elimination of low frequencies), etc. Such signal manipulations interfere with the dynamics of the reproduced sound, reducing headroom and degrading signal quality and "naturalness." The SSM-1 (Universal Noise Suppressor Microphone Support) was created to provide acoustic solutions for acoustic problems. We have tried lots of solutions, but the Sabra-Som SSM 1 decouples the mic from "thumps" better than anything else we know of, regardless of price. By physically isolating the microphone from its stand, the SSM-1 reduces undesirable noises up to 15dB. Acoustic improvements from using the SSM-1 are often drastic and immediate.Not just for the studio, the SSM-1 also allows the live engineer to recover the low end and low-mid efficiency of the system while sourcing the true response of the mic.Fits any diameter mic up to 2", from heavy tube mic to lavalierThis clever little design uses powerful elastics on two rings that can be moved closer or farther apart along a hexagonal metal bar. You can mount anything in SSM1 from a heavy large diaphragm tube mic to a lavalier. It's versatility in mounting methods and adjustments makes the SSM-1 compatible with almost all shapes, sizes and types of microphone on the market, up to 2" in diameter. To correctly mount a microphone, simply weave it through the parallel, high-quality, braid-covered elastic bands of each ring, two by two. Adjustable Weight SupportThe central articulated support can be adjusted and moved along a hexagonal rod to compensate for any imbalance in the set-up's center of gravity. For heavier mics, insert the body of the mic into the bands without weaving, to retain the elasticity. Then, if necessary, add an additional ring to the bar, by the bottom part of the mic, and weave it around the XLR connector, thus placing the weight of the mic on 3 rings at once....details

Sabra Universal Microphone Shockmount with Pop Filter
The Sabra mic protection kit is just what you need for your studio! The heavy-duty double support system and noise suppressor hold your mics gently, keeping floor rumble at bay. The integral pop filter does what all good pop filters do: it keeps those plosive consonants from overloading the signal or even damaging the mic capsule....details

Sabra Magic Clamp Kit for Microphones
The Sabra Som Magic Clamp Kit is a collection of versatile mic mounting clamps especially for drummers or for folks who must mount microphones in odd places. The kit contains the claw-like Magic Clamp itself that can be clamped to round tubes from 1/4 inch to 1-1/8 inch in diameter or rectangular rods to 1-1/2 inches in diameter.This Magic Clamp grips a mic stand pole, a boom arm, drum hardware (drum hoop, cymbal stands, etc) - almost anything. An Articulated Elbow is attached to the Magic Clamp, then a Hex Bar inserted and one or more Threaded Towers can be slid along the Hex Bar and set with lock screws. You can come up with a wide variety of mounting configurations and combinations with the clever kit, especially if you add a Sabra Som ST2 two mic bar.Supplied with the Magic Clamp Kit are: • One Magic Clamp • One Articulated Elbow Stand Mount • One Threaded Tower • Four Hex Bars, 2, 4, 6, 8 and 12 inches longAbout Sabra-Som In our never-ending quest to bring you the best and most useful musical products and accessories, every once and again we come across pure gold. One such discovery is Sabra-Som, is a Brazilian company that makes a line of unique and exceptionally clever modular and adaptive mic stand accessories. Based around a hex-rod design, each piece can be custom fit for any situation you might run into at the studio. Sabra-Som pop-filters, shockmounts, and T-bars are easy to use and some of the most flexible you will find anywhere. With Sabra-Som's modular systems, you can mix and match to make your own special miking kits....details

Sabra ST4 Four Mic Bar
The Sabra Som ST4 Four Mic Bar is a multi-microphone mount. It uses 4 sliding mic mounts on a longer 11" bar so you can mount up to four microphones onto one mic stand. Four mic mounts can be individually moved along the bar and the bar itself can be tilted left to right or used vertically.For a really wide stereo panorama, use this bar to set 4 mics on one stand with two approximately 45 degrees right and left of center and the other two approximately 55 degrees right and left. Record all 4 channels separately. The result is a much wider stereo image than you'd get with just a pair. About Sabra-Som In our never-ending quest to bring you the best and most useful musical products and accessories, every once and again we come across pure gold. One such discovery is Sabra-Som, is a Brazilian company that makes a line of unique and exceptionally clever modular and adaptive mic stand accessories. Based around a hex-rod design, each piece can be custom fit for any situation you might run into at the studio. Sabra-Som pop-filters, shockmounts, and T-bars are easy to use and some of the most flexible you will find anywhere. With Sabra-Som's modular systems, you can mix and match to make your own special miking kits....details