Slate Pro Audio

Slate Pro Audio DRAGON Dynamic Audio Processor
The Slate Digital DRAGON Dynamic Audio Processor is unlike any other audio processor you've heard before. The DRAGON processor starts with a classic FET compressor circuit, reminiscent of vintage units from the 60's and 70's. But the Slate Pro Audio engineers enhanced the DRAGON's circuitry with a mastering grade signal path, including a CLASS A output section based around a custom-made transformer. The result is that the DRAGON's compression quality that is rich and warm, but is also capable of sharp and aggressive tones. But this is only the start of what the DRAGON dynamic processor can do. Three character settings change the way the DRAGON sounds and responds. The first setting is BOOM, which adds sub bass harmonics in a unique way. When combined with some compression, BOOM can make basses sound massive and kick drums pound like you've never heard before. The second setting is BITE, which adds a gentle forward character that makes the source more defined and clear. The DRAGON processor's BITE is superb on bass, snare, vocals, and guitars. Last, is SHEEN which adds an airy gloss to the source, reminiscent of classic opto tube compressors. The DRAGON's SHEEN setting is absolutely stunning on vocals, acoustics, and overheads. All 3 character settings can be used simultaneously! A 'VINTAGE' button enables circuitry which emulates a more vintage sound from a classic age of compression. The result is more harmonics, a bit of 'grit', and an overall more aggressive sound that is amazing on electric guitars, bass, and a must-hear on drums. The Slate Digital DRAGON has a 3-setting saturation selector for adding subtle harmonics or even gritty distortion to your audio source. On setting 1, it can add just the right of "life" to a dull vocal. On setting 2, it can add presence and warmth to a bass. On setting 3, it can add some rich harmonics to a snare to bring out the sustain. A high-pass filter gives you the option to control the amount of low end that feeds the compressor detection. This is useful when stereo linking two DRAGONS together for transparent mixbuss compression, or for grouped drum compression where you don't want the drums to 'pump'. Classic FET compressors have not been common mixbuss choices due to their excessive color and aggressive nature. However, the DRAGON includes a gentle 2:1 setting that sounds amazing on full mixes. With the character, vintage, and saturate options disabled, the signal path is quiet and clean with just the write amount of rich tone. Of course if you need more color or saturation on your buss, it's just a button or switch away. With settings 2:1, character SHEEN, Saturate 1, and slow attack and fast release, your mix will come alive in an incredible way. The DRAGON is one of the finest drum compressors to ever hit the analog market, and is complete with the famous overcompression "all buttons in" mode called 'Squash'. Th...details